
仪器用高压测漏法检测多种非金属涂层的凹点,裂缝,破洞等。
Elcometer 236 方便的背包设计,将探头手柄和附件都连在前部,非常适用于野外、现场或实验室检验。
附件包可包含备用充电电池(选购项),该附件包亦能并入便携软包——因此免掉充电,延长了检验时间。
Elcometer 236 有两个型号:0.5 - 15kV 和 0.5 - 30kV。每台仪器的电压和灵敏度设置完全可由用户自己调节。
Elcometer 236 15kV 电火花检漏仪 |
Elcometer 236 30kV 电火花检漏仪 |
证书 | |
部件编号 |
D236--15KV | D236--30KV | ο |
部件编号带证书 |
D236--15KVC | D236--30KVC | • |
输出电压 |
0.5 - 15kV 间隔100V |
0.5 - 30kV间隔100V |
|
显示分辨率 |
0.01kV | 0.1kV | |
大概厚度范围 |
0 - 3.75mm (0 - 150mils) | 0 - 7.5mm (0 - 300mils) | |
操作温度 |
0°C 至 50°C (32°F 至 120°F) | ||
报警方式 |
声音和可视 | ||
电源 |
12V内置充电电池 | ||
电池寿命(约) |
10/12小时持续使用,选购件外接电池包可延长至20/24小时的连续使用 | ||
尺寸 |
200 x 170 x 70mm (6 x 7 x 3”) | ||
重量 |
2.8kg (6lb 3oz) | ||
包装清单 |
易高236主机,探头手柄和线,带状刷探头,2m (79”) 和 10m (394”)信号反馈线/接 地线,带3种电源线(英制、欧制和美制)的电池充电器,提包,运输箱和操作手册 |
标准:
ANSI/AWWA C213, AS 3894.1, ASTM C 536, ASTM C 537, ASTM D 4787, ASTM G 6, ASTM D 5162-B, ASTM G 62-B, BS1344-11, DIN 55670, EN 14430, ISO 2746, JIS K 6766, NACE RP0188, NACE RP0274, NACE RP0490, NACE SP0188, NACE SP0490
灰色是已经被取代但在一些行业内仍被认可的标准。
ο可选择提供校准证书
•作为标准提供证书。
T23622790-1 |
伸缩探头手柄,600 - 1200mm (24 - 47") |
T23622790-2 |
伸缩探头手柄,1800 - 3600mm (71 - 142") |
T236139031 |
2m (6.5')接地信号反馈线 |
T236139032 |
10m (32')接地信号反馈线 |
T23615550 |
外接电池包 |
An Introduction to Pinholes and Holidays – Porosity Detection
Corrosion is caused by two things – a steel substrate and oxygen, while contaminants such as water can accelerate the process. The coating is there to protect the steel from oxygen and contaminants. A flaw in the coating can leave the substrate poorly protected, or in some cases completely exposed.
Click here to download the video script in English.
An Introduction to Pinholes and Holidays – Porosity Detection
Corrosion is caused by two things – a steel substrate and oxygen, while contaminants such as water can accelerate the process. The coating is there to protect the steel from oxygen and contaminants. A flaw in the coating can leave the substrate poorly protected, or in some cases completely exposed.
Click here to download the video script in English.
The high voltage method comes in two versions – Continuous DC and Pulsed DC. In this video, we’ll be introducing you to the Continuous DC method, which is used to test non-conductive coatings up to 7.5mm (300mils) thick on conductive substrates.
Click here to download the video script in English.
Setting the correct voltage is vital, as testing with a voltage that is too low could fail to break down the gap between the probe and substrate, missing flaws. While testing with a voltage that’s too high could break down and damage the coating, causing the unit to alarm when there are no flaws, while creating a flaw in the process. Testing with bright blue sparks is a clear sign the voltage is too high, and is probably damaging the coating.
Click here to download the video script in English.
Choosing the correct probe for your Elcometer High Voltage Holiday Detector
When it comes to testing the porosity of coatings using the high voltage or holiday detection method, regardless of whether you’re using a Continuous DC, or Pulsed DC detector, it’s important to choose the right probe for your application, so you can test thoroughly, efficiently, and ensure the most reliable results.
Click here to download the video script in English