Elcometer 138/2 Oppervlakteverontreinigingskit

  • Protectieve coatings
  • Industriële afwerking
pH-Test-Strips
Chloride-Test-Strips

Het meten van het verontreinigingsniveau op het oppervlak voorafgaand aan het aanbrengen van een coating is essentieel om de kwaliteit van de coating te kunnen waarborgen en de optimale levensduur ervan te bereiken.

  • Samenvatting
    • Samenvatting

    • Als de coating wordt aangebracht op een verontreinigd oppervlak dat niet goed is voorbereid, kunnen er vroegtijdige defecten aan de coating ontstaan, wat leidt tot hoge kosten voor het opnieuw coaten en onderhouden van het product.

      De Elcometer 138/2 Kit voor Oppervlaktevervuiling dient voor het meten van onzichtbare verontreiniging op oppervlakken, inclusief:

      • pH
      • Chloride-ionen
      • Ijzer
      • Zouten

  • Belangrijkste kenmerken
    • Belangrijkste kenmerken

      Elcometer 138/2 Oppervlakteverontreinigingskit

      Chloride Test Strips

      Chloride Test Strips

      Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.

      The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.

      Iron Test Strips

      Iron Test Strips

      Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.

      pH Test Strips

      pH Test Strips

      These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.

      The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.

  • Technische informatie
    • Technische Specificaties
      Elcometer 138/2 Oppervlakteverontreinigingskit
      Artikelnummer Beschrijving Certificaat
      E138----2 Elcometer 138/2 Kit voor Oppervlaktevervuiling
      Certificate of Cleanliness & Test Area available at www.elcometer.com/cert
      Meetbereik pH: 0pH - 14pH, Ijzer: 3,10, 25, 50, 100, 250, 500mg/I Fe², Chloride: 30 - 600ppm Cl
      Afmetingen 300 x 220 x 75mm (11 x 8,6 x 3”)
      Gewicht 2,1kg (4.62lb)
      Paklijst 100pH teststrips, 100 ijzer teststrips, 40 chloride teststrips, 50 x Elcometer 135C Bresle-testpatch 3 x 5ml (0,17fl oz) spuiten, 3 naalden, 30ml (1fl oz) plastic beker, koffer, handleiding
      Certificaat dat reinheid & testgebied garandeert beschikbaar via www.elcometer.com/cert
  • Normen
    • Normen
      Elcometer 138/2 Oppervlakteverontreinigingskit

      AS 3894.6-A, AS 3894.6-D, SSPC Guide 15

  • Downloads
    • Downloads
        • Elcometer 138/2 kit voor oppervlaktevervuiling - Handleiding

        • Elcometer 138/2 kit voor oppervlaktevervuiling - Informatieblad

  • Artikelnummer
    • Artikelnummer
      Elcometer 138/2 Oppervlakteverontreinigingskit
      • Elcometer 138/2 Kit voor Oppervlaktevervuiling
        • Artikelnummer : E138----2
  • Toebehoren
    • Toebehoren
      Elcometer 138/2 Oppervlakteverontreinigingskit
      • Artikelnummer: E135----C25
      • Artikelnummer: E135----C100
      • Artikelnummer: T13820562
      • Artikelnummer: T13820564
      • Artikelnummer: T13820563
      • Artikelnummer: T13818517
      • Artikelnummer: T13818518
      • Artikelnummer: T13818519
      • Artikelnummer: T13827259

Elcometer 138/2 Oppervlakteverontreinigingskit

  • Protectieve coatings
  • Industriële afwerking
pH-Test-Strips
Chloride-Test-Strips

Het meten van het verontreinigingsniveau op het oppervlak voorafgaand aan het aanbrengen van een coating is essentieel om de kwaliteit van de coating te kunnen waarborgen en de optimale levensduur ervan te bereiken.

Samenvatting

Elcometer 138/2 Oppervlakteverontreinigingskit

Als de coating wordt aangebracht op een verontreinigd oppervlak dat niet goed is voorbereid, kunnen er vroegtijdige defecten aan de coating ontstaan, wat leidt tot hoge kosten voor het opnieuw coaten en onderhouden van het product.

De Elcometer 138/2 Kit voor Oppervlaktevervuiling dient voor het meten van onzichtbare verontreiniging op oppervlakken, inclusief:

• pH
• Chloride-ionen
• Ijzer
• Zouten

Downloads
    • Elcometer 138/2 kit voor oppervlaktevervuiling - Handleiding

    • Elcometer 138/2 kit voor oppervlaktevervuiling - Informatieblad

Belangrijkste kenmerken

Elcometer 138/2 Oppervlakteverontreinigingskit

Chloride Test Strips

Chloride Test Strips

Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.

The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.

Iron Test Strips

Iron Test Strips

Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.

pH Test Strips

pH Test Strips

These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.

The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.

Technische Specificaties
Elcometer 138/2 Oppervlakteverontreinigingskit
Artikelnummer Beschrijving Certificaat
E138----2 Elcometer 138/2 Kit voor Oppervlaktevervuiling
Certificate of Cleanliness & Test Area available at www.elcometer.com/cert
Meetbereik pH: 0pH - 14pH, Ijzer: 3,10, 25, 50, 100, 250, 500mg/I Fe², Chloride: 30 - 600ppm Cl
Afmetingen 300 x 220 x 75mm (11 x 8,6 x 3”)
Gewicht 2,1kg (4.62lb)
Paklijst 100pH teststrips, 100 ijzer teststrips, 40 chloride teststrips, 50 x Elcometer 135C Bresle-testpatch 3 x 5ml (0,17fl oz) spuiten, 3 naalden, 30ml (1fl oz) plastic beker, koffer, handleiding
Certificaat dat reinheid & testgebied garandeert beschikbaar via www.elcometer.com/cert
Normen
Elcometer 138/2 Oppervlakteverontreinigingskit

AS 3894.6-A, AS 3894.6-D, SSPC Guide 15

Artikelnummer
Elcometer 138/2 Oppervlakteverontreinigingskit
  • Elcometer 138/2 Kit voor Oppervlaktevervuiling
    • Artikelnummer : E138----2
   
Toebehoren
Elcometer 138/2 Oppervlakteverontreinigingskit
  • Artikelnummer: E135----C25
  • Artikelnummer: E135----C100
  • Artikelnummer: T13820562
  • Artikelnummer: T13820564
  • Artikelnummer: T13820563
  • Artikelnummer: T13818517
  • Artikelnummer: T13818518
  • Artikelnummer: T13818519
  • Artikelnummer: T13827259