When developing any solvent based liquid including paint, coating or ink it is imperative that the flash point is determined and declared in order to meet the stringent transport regulations laid down by governments around the world. Flash Point is defined as “the lowest temperature of a liquid at which its vapours will form a combustible mixture with air”. It is a convenient and reliable classification of the “flammability” of many substances.
Most industries need to test the Flash Point of raw materials, products or waste to ensure:
- Product quality - as a measure of consistency and performance comparison
- Compliance testing - to test safety classification for handling, storage, transport and waste
- In-service analysis - tests on in-use oils and other substances for contamination/adulteration
- General safety - to evaluate hazard potential
- Specifications - to check conformance
Tijdens de ontwikkeling van oplosmiddelmengsels zoals coating, inkt of parfum is het uiterst belangrijk het vlampunt te bepalen. Wettelijk moet het vlampunt op het veiligheidsinformatieblad van het product vermeld worden om te voldoen aan de strenge transportmaatregelen van de autoriteiten wereldwijd. Het vlampunt wordt gedefinieerd als de laagste temperatuur waarop een vloeistof nog voldoende damp afgeeft om te ontbranden wanneer vermengd met lucht. Dit is een makkelijke en betrouwbare classificatie van de “ontvlambaarheid” van vele stoffen.
De meeste industriesectoren moeten het vlampunt van grondstoffen, producten of afval testen in verband met:
Productkwaliteit - om de consistentie te bepalen en de prestaties te vergelijken
Conformiteitskeuring - om de veiligheidsklasse te bepalen i.v.m. hantering, opslag, transport en afvalverwerking
Analyse tijdens gebruik - testen van gebruikte oliën en andere stoffen op verontreiniging/vervalsing
Algemene veiligheid - voor evalueren van potentiële gevaren
Specificaties - om de overeenstemming te controleren
When developing any solvent based liquid including paint, coating or ink it is imperative that the flash point is determined and declared in order to meet the stringent transport regulations laid down by governments around the world. Flash Point is defined as “the lowest temperature of a liquid at which its vapours will form a combustible mixture with air”. It is a convenient and reliable classification of the “flammability” of many substances.
Most industries need to test the Flash Point of raw materials, products or waste to ensure:
- Product quality - as a measure of consistency and performance comparison
- Compliance testing - to test safety classification for handling, storage, transport and waste
- In-service analysis - tests on in-use oils and other substances for contamination/adulteration
- General safety - to evaluate hazard potential
- Specifications - to check conformance
Tijdens de ontwikkeling van oplosmiddelmengsels zoals coating, inkt of parfum is het uiterst belangrijk het vlampunt te bepalen. Wettelijk moet het vlampunt op het veiligheidsinformatieblad van het product vermeld worden om te voldoen aan de strenge transportmaatregelen van de autoriteiten wereldwijd. Het vlampunt wordt gedefinieerd als de laagste temperatuur waarop een vloeistof nog voldoende damp afgeeft om te ontbranden wanneer vermengd met lucht. Dit is een makkelijke en betrouwbare classificatie van de “ontvlambaarheid” van vele stoffen.
De meeste industriesectoren moeten het vlampunt van grondstoffen, producten of afval testen in verband met:
Productkwaliteit - om de consistentie te bepalen en de prestaties te vergelijken
Conformiteitskeuring - om de veiligheidsklasse te bepalen i.v.m. hantering, opslag, transport en afvalverwerking
Analyse tijdens gebruik - testen van gebruikte oliën en andere stoffen op verontreiniging/vervalsing
Algemene veiligheid - voor evalueren van potentiële gevaren
Specificaties - om de overeenstemming te controleren
- Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (corrosievast)
- Elcometer 6910 Setaflash ‘Series 8’ Active-cool tester met gesloten beker
- Elcometer 6910 Setaflash ‘Series 8’ tester met gesloten beker
- Elcometer 6910/3 Setaflash serie 3 Active-Cool
- Elcometer 6910/1 Setaflash ‘Series 3’ tester met gesloten beker
- Elcometer 6910/2 Setaflash ‘Serie 3’ open bekertester