Elcometer 138/2 Oppervlakteverontreinigingskit
- Protectieve coatings
- Industriële afwerking
Het meten van het verontreinigingsniveau op het oppervlak voorafgaand aan het aanbrengen van een coating is essentieel om de kwaliteit van de coating te kunnen waarborgen en de optimale levensduur ervan te bereiken.
- Samenvatting
-
Samenvatting
-
Als de coating wordt aangebracht op een verontreinigd oppervlak dat niet goed is voorbereid, kunnen er vroegtijdige defecten aan de coating ontstaan, wat leidt tot hoge kosten voor het opnieuw coaten en onderhouden van het product.
De Elcometer 138/2 Kit voor Oppervlaktevervuiling dient voor het meten van onzichtbare verontreiniging op oppervlakken, inclusief:
• pH
• Chloride-ionen
• Ijzer
• Zouten
-
- Belangrijkste kenmerken
-
Belangrijkste kenmerken
Elcometer 138/2 Oppervlakteverontreinigingskit
Chloride Test Strips
Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.
The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.
Iron Test Strips
Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.
pH Test Strips
These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.
The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.
-
- Technische informatie
-
Technische SpecificatiesElcometer 138/2 Oppervlakteverontreinigingskit
Artikelnummer Beschrijving Certificaat E138----2 Elcometer 138/2 Kit voor Oppervlaktevervuiling Meetbereik pH: 0pH - 14pH, Ijzer: 3,10, 25, 50, 100, 250, 500mg/I Fe², Chloride: 30 - 600ppm Cl Afmetingen 300 x 220 x 75mm (11 x 8,6 x 3”) Gewicht 2,1kg (4.62lb) Paklijst 100pH teststrips, 100 ijzer teststrips, 40 chloride teststrips, 50 x Elcometer 135C Bresle-testpatch 3 x 5ml (0,17fl oz) spuiten, 3 naalden, 30ml (1fl oz) plastic beker, koffer, handleiding ● Certificaat dat reinheid & testgebied garandeert beschikbaar via www.elcometer.com/cert
-
- Normen
-
NormenElcometer 138/2 Oppervlakteverontreinigingskit
AS 3894.6-A, AS 3894.6-D, SSPC Guide 15
-
- Downloads
-
Downloads
- Artikelnummer
-
ArtikelnummerElcometer 138/2 OppervlakteverontreinigingskitNo data found!!
-
Elcometer 138/2 Kit voor Oppervlaktevervuiling
- Artikelnummer : E138----2
- Toebehoren
-
ToebehorenElcometer 138/2 Oppervlakteverontreinigingskit
-
Artikelnummer: E135----C25
-
Artikelnummer: E135----C100
-
Artikelnummer: T13820562
-
Artikelnummer: T13820564
-
Artikelnummer: T13820563
-
Artikelnummer: T13818517
-
Artikelnummer: T13818518
-
Artikelnummer: T13818519
-
Artikelnummer: T13827259
-
-
- Home
- Coating Inspectie
- Coating Inspectie
- Inspectiekits
- Elcometer 138/2 Oppervlakteverontreinigingskit
Elcometer 138/2 Oppervlakteverontreinigingskit
- Protectieve coatings
- Industriële afwerking
Het meten van het verontreinigingsniveau op het oppervlak voorafgaand aan het aanbrengen van een coating is essentieel om de kwaliteit van de coating te kunnen waarborgen en de optimale levensduur ervan te bereiken.
Samenvatting
Elcometer 138/2 Oppervlakteverontreinigingskit
Als de coating wordt aangebracht op een verontreinigd oppervlak dat niet goed is voorbereid, kunnen er vroegtijdige defecten aan de coating ontstaan, wat leidt tot hoge kosten voor het opnieuw coaten en onderhouden van het product.
De Elcometer 138/2 Kit voor Oppervlaktevervuiling dient voor het meten van onzichtbare verontreiniging op oppervlakken, inclusief:
• pH
• Chloride-ionen
• Ijzer
• ZoutenBelangrijkste kenmerken
Elcometer 138/2 Oppervlakteverontreinigingskit
Chloride Test Strips
Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.
The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.
Iron Test Strips
Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.
pH Test Strips
These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.
The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.
Technische SpecificatiesElcometer 138/2 OppervlakteverontreinigingskitArtikelnummer Beschrijving Certificaat E138----2 Elcometer 138/2 Kit voor Oppervlaktevervuiling Meetbereik pH: 0pH - 14pH, Ijzer: 3,10, 25, 50, 100, 250, 500mg/I Fe², Chloride: 30 - 600ppm Cl Afmetingen 300 x 220 x 75mm (11 x 8,6 x 3”) Gewicht 2,1kg (4.62lb) Paklijst 100pH teststrips, 100 ijzer teststrips, 40 chloride teststrips, 50 x Elcometer 135C Bresle-testpatch 3 x 5ml (0,17fl oz) spuiten, 3 naalden, 30ml (1fl oz) plastic beker, koffer, handleiding ● Certificaat dat reinheid & testgebied garandeert beschikbaar via www.elcometer.com/certArtikelnummerElcometer 138/2 OppervlakteverontreinigingskitNo data found!!-
Elcometer 138/2 Kit voor Oppervlaktevervuiling
- Artikelnummer : E138----2
ToebehorenElcometer 138/2 Oppervlakteverontreinigingskit-
Artikelnummer: E135----C25
-
Artikelnummer: E135----C100
-
Artikelnummer: T13820562
-
Artikelnummer: T13820564
-
Artikelnummer: T13820563
-
Artikelnummer: T13818517
-
Artikelnummer: T13818518
-
Artikelnummer: T13818519
-
Artikelnummer: T13827259
- Artikelnummer
-