製品説明
仕様
アクセサリー
取扱説明書データシート
ビデオ

Elcometer 106プルオフ式付着性試験機

塗膜の付着性を数値で読み取れる、使いやすく、持ち運びしやすい試験 機です。ペンキ塗りやプラズマ溶射された甲板、鋼鉄やアルミニウム、 コンクリート地の試験に使用できます。

  • 収納ケース付き – 現場での試験に最適
  • 手動式 – 電源不要
  • 手動式 – 電源不要

試験方法
ドリーを接着剤で塗膜に固着させます。Elcometer 106には、ドリーを引 き上げる力を徐々に強めるスプリングが入っています。

塗膜が剥がれたときに目盛を読み取ります。この値が塗膜の付着力です。 ドリーを離すのに必要な単位面積当たりの力として示されます。

試験後にドリーの接着面を検査して、試験が失敗しなかったことを確認 する必要があります。

付着力の低い塗膜や平坦でない面での試験用に、直径40mm(1.52イン チ)のドリーもあります。このドリーを使用する場合は、読み取り値を 4で割ってください。

Elcometer 106プルオフ式付着性試験機
Elcometer 106プルオフ式付着性試験機

仕様

コード番号 説明 測定範囲
MPa (N/mm2) kg/cm2 psi 証明書
F106----5 Elcometer 106付着性試験機 - スケール5 0 - 0.2 0 - 2 0 - 30 ο
F106----1 Elcometer 106付着性試験機 - スケール1 0 - 3.5 0 - 35 0 - 500 ο
F106----2 Elcometer 106付着性試験機 - スケール2 0 - 7.0 0 - 70 0 - 1000 ο
F106----3 Elcometer 106付着性試験機 - スケール3 0 - 15 0 - 150 0 - 2000 ο
F106----4 Elcometer 106付着性試験機 - スケール4 0 -22 0 - 220 0 - 3200 ο
寸法 スケール1、2、5:175x76mm(7x3インチ) スケール3と4:185 x 76 mm (7.5 x 3インチ)
ドリーの直径 20mm (0.76インチ)
ドリーの底面積 314mm² (0.49平方インチ)
キット総重量 スケール1、2、5:2.8kg(6.2ポンド)スケール4:4.2kg(9.3ポンド) スケール3:4.5kg(9.9ポンド)
内用品 Elcometer 106プルオフ式付着性試験機、ドリー20個、アラルダイト接着剤、本体サポートリング、磁石 式ドリー固定具、円形カッター、ラチェットスパナ(スケール3と4のみ)、収納ケース、取扱説明書


適合規格:
AS 1580.408.5, ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062, NF T30-606

色标准已经取代但在一些行业的认可

校正証明書(オプション)

アクセサリー

T1062895-10 交換用ドリー、直径20mm(0.76インチ)、10個入り
T1062895- 交換用ドリー、直径20mm(0.76インチ)、100個入り
T1062914- 大型ドリー、直径40mm(1.52インチ)、5個入り
T1062915- 直径40mm(1.52インチ)ドリー用大型リング
T99912906

アラルライドスタンダード(2液混合タイプのエポキシ接着剤)、15ml入りチューブ2本

T99914009 20mm(0.76インチ)の円形カッター
T99923924    Elcometer付着性試験機検定器(AVU)

ビデオ

1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

ビデオ

1. An Introduction to Pull-Off Adhesion on Coated Surfaces
1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/rBTGaP-OXLM
2. Selecting the Dolly Diameter and Gauge
2. Selecting the Dolly Diameter and Gauge

When it comes to selecting the dolly diameter and adhesion gauge type to use for a pull-off adhesion test; factors such as the substrate material, the substrate shape, and the expected coating strength will affect the dolly or gauge the user chooses.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/NskjSM8n5UY
3. Selecting the most Appropriate Position for an Adhesion Test
3. Selecting the most Appropriate Position for an Adhesion Test

When preparing a pull-off adhesion test, whilst the actual location and the number of pulls is typically defined by the test method or procedure that’s being followed, the actual positioning of the dolly is vital, as poor positions can result in low pull-off values or invalid tests.


 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here. 

To download the video script in English click here.

 

//www.youtube.com/embed/7xmYIfozQaw
4. Preparing the Dolly and the Coating
4. Preparing the Dolly and the Coating

Properly preparing the dolly and the surface before performing a pull-off adhesion test will help achieve higher pull-off values.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/-26j4aoiFe8
5. To Cut or Not to Cut?
5. To Cut or Not to Cut?

Should the coating around a dolly be cut, or left uncut prior to a pull-off adhesion test; and whose decision is it to make?

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/ZqSNwQSOPqA
6. The Pull-Off Test
6. The Pull-Off Test

Once the glue between a properly prepared dolly or pull stub and a properly prepared coating has fully cured, the pull-off adhesion test can be undertaken using the adhesion tester of choice.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/4rjUgA2Lwos
7. Assessing the Result; Glue, Adhesive and Cohesive Failures
7. Assessing the Result; Glue, Adhesive and Cohesive Failures

Once the pull-off adhesion test has been completed the tensile pull-off force, whether the coating was coat or not, the dolly size and gauge type, and the failure mode of the coating are all recorded; with the nature of the failure usually recorded as an estimated percentage to the nearest 10%.

 

This video is part of a series on Pull-Off Adhension Testing, to view the playlist please click here.


To download the video script in English click here.

//www.youtube.com/embed/TuFY8_KI9lQ
<P> 8. Measuring the Pull-Off Adhesion of Coatings on Concrete</P>

 8. Measuring the Pull-Off Adhesion of Coatings on Concrete

Testing coating adhesion on concrete substrates using a pull-off adhesion gauge is similar to testing coatings on metal substrates. However, there are a number of differences in the test procedures and equipment used.


This video is part of a series on Pull-Off Adhension Testing, to view the series playlist please click here.


To download the video in script in English click here.

//www.youtube.com/embed/O0wMikGLi84