Product Description
Technical Specification
Accessories
Data Sheet

Elcometer 5750 Taber® Linear Abraser

Whatever your product, be it curved, round, big or small, the Linear Abraser from Taber® can test it all.

Using a free floating head to follow the contours of the sample, the Taber® 5750 is the ideal abrasion tester for flat or curved surfaces. It may also be used as a scratch tool, using the scratch kit accessory.

Abrasion media, length of stroke, load and speed of stroke can all be user defined to meet specific requirements.

The Linear Abraser uses a range of Wearasers®. The size and shape of a pencil eraser, the Wearasers® uses the same high quality Taber® abrasive media as used on the Taber® Rotary Abrasers, simulating real-life wear conditions.

Features:

  • Stroke lengths of 12.7, 25, 76 and 102mm (0.5, 1.0, 3.0 and 4.0”)
  • Variable stroke speed from 2 - 75 cycles per minute
  • Preset stroke speed buttons for 2, 15, 25, 30, 40 and 60 cycles per minute
  • Variable load from 350 - 2100g (12.4 - 74.1oz) with optional weights
  • Stainless steel Wearasers® holder (Collet) for use with vitrified or resilient Wearasers®
  • Laser alignment guide
Elcometer 5750 Taber® Linear Abraser

Technical Specification

Part Number Description
ST985750 Elcometer Taber® 5750 Linear Abraser (230V/115V, 50/60Hz)
Dimensions 208 x 228 x 279mm (20 x 9 x 11”)
Weight 10kg (22lb)
Packing List Elcometer Taber® 5750 Linear Abraser, Wearasers® Collet and Spine Shaft, 3 x 250g (8.82oz) discs, 10 x CS-10 Wearasers®, 5 x H-18 Wearasers®, power cords (230V and 115V), allen key, Wearasers® depth tool gauge, 50 x S-14 refacing strips, hand brush and operating instructions


STANDARDS:
AATCC Method 8, ASTM D 2197, ASTM D 5178, ASTM D 6279, ASTM F1319, ISO 105-X12, JIS L 0849

Accessories

ST131852 Wearasers® Holder (collet) Kit - Aluminium
ST131852-1 Wearasers® Holder (collet) Kit - Plastic
ST130575 Scratch Kit - Stainless Steel (includes conical diamond tool - 3mil and x7 measuring magnifier)
ST131604 ISO Scratch Kit - Aluminium (includes conical diamond tool - 3.5mil and x7 measuring magnifier)
ST121006 Conical Diamond Tool with 90°, 76.2µm (3 mils) Radius Point (for use with Scratch kit)
ST121006-1 Conical Diamond Tool with 90°, 88.9µm (3.5 mils) Radius Point (for use with Scratch kit)
ST131716-1 Coin Holder Attachment 45° (for use with Scratch Kit)
ST131716-2 Coin Holder Attachment 60° (for use with Scratch Kit)
ST131716-3 Coin Holder Attachment 75° (for use with Scratch Kit)
ST130570 Crockmeter Kit*

 

*Crockmeter kit includes finger, clamp ring and cloths