Product Description
Technical Specification
Accessories
Data Sheet

Elcometer 3120 Shore Durometer

The Elcometer 3120 range of durometers is widely used to test the hardness of soft materials. A round point indents the material under a fixed force spring and the hardness is displayed on the dial in Shore Hardness Units.

The instrument can be either hand-held or fitted to an optional stand for increased repeatability.

Note: The Elcometer 3120 range of Shore Durometers encompasses a number of hardness values. Please refer to the table below.

 

hardness range

Elcometer 3120 Shore Durometer
Elcometer 3120 Shore Durometer

Technical Specification

Part Number Description Certificate 
Without Certificate With Certificate    
K0003120M001 K0003120M015 Elcometer 3120 Shore Durometer A ο
K0003120M008 - Elcometer 3120 Shore Durometer A with Max indicator  
- K0003120M025 Elcometer 3120 Shore Durometer A with Max indicator and 10N weight ο
K0003120M005 K0003120M018 Elcometer 3120 Shore Durometer D ο
K0003120M009 -
Elcometer 3120 Shore Durometer D with Max indicator  
Dimensions 50 x 50 x 110mm (1.9 x 1.9 x 4.3”)
Weight 300g (10.58oz)
Packing List Elcometer Shore Durometer and operating instructions. A Check Piece is supplied with Elcometer Shore Durometers A and D



STANDARDS:
ASTM D 2240, BS 7442-3.2, DIN 53505, FIAT 50411, ISO 868, ISO 7267-2, NF T51-123, NF T 51-174

Standards in grey have been superseded but are still recognised in some industries.

 

ο Calibration Certificate available under the separate part number listed

Accessories

KT003120N002 Test Stand BS 61 II with 10N Load for Shore A, B & O
KT003120N005 Test Stand BS 61 II with 50N Load & Control Ring for Shore D, C & DO