Product Description
Technical Specification
Instruction ManualData Sheet

Elcometer 3000 Manual Clemen Unit

The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.

A tool is fitted with an hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually on to the sample surface which is then pulled linearly 60mm (2.36”).

Depending on the load applied, varying degrees of penetration of the tool into the coating are observed - from a superficial trace to total destruction.

Elcometer 3000 Manual Clemen Unit
Elcometer 3000 Manual Clemen Unit

Technical Specification

Part Number Description Certificate
K0003000M001 Elcometer 3000 Manual Clemen Unit ο
Sample Width 75mm (2.95")  
Variable Load 0 - 2000g (70.5oz)  
Dimensions Manual: 410 x 200 x 155mm (16.1 x 7.9 x 6.1")  
Weight Manual: 6 kg (13.2 lb)  
Packing List Elcometer 3000 Manual Clemen Unit, 1kg (35.27oz) weight, 1mm (0.04") ball tool and operating instructions 


AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2011

Standards in grey have been superseded but are still recognised in some industries.


ο Optional Calibration Certificate available


KT003000P021 1 mm (0,04") Ball Tool in Tungsten Carbide
KT003000N001 2 mm (0,08") Cutting Tool in Tungsten Carbide
KT003000N013 VW Cutting Tool
KT003000N002 1 cm2 (0,15 inch2) Rubber Tool (to be used as a guide to the dryness of a sample)
KT007210M001 Illuminated Microscope (x30)
KT001546N002 Cross Cut Magnifying Glass