Product Description
Technical Specification
Accessories
Instruction ManualData Sheet

Elcometer 2020 Fineness of Grind Gauges

The Elcometer Fineness of Grind Gauges are used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.

These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).

Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have a tolerance of ±2μm (0.08mil). The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).

 

How to use a Fineness of Grind Gauge

how to use fineness of grind gauge

The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops.
Elcometer 2020  Fineness of Grind
Elcometer 2020 Fineness of GrindHow to use Fineness of Grind

Technical Specification

Part Number Model Range Hegman (NS) North (PCU) Graduation   Certificate
Metric Imperial   µm mils     µm mils  
K0002020M003 - Elcometer 2020/3 0-15 - 8-7 10-9 1 - ο
K0002020M004 K0US2020M004 Elcometer 2020/4 0-25 0-1 8-6 10-8 2.5 0.1 ο
K0002020M001 K0US2020M001 Elcometer 2020/1 0-50 0-2 8-4 10-5 5 0.2 ο
K0002020M002 K0US2020M002 Elcometer 2020/2 0-100 0-4 8-0 10-0 10 0.5 ο
Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
Weight 1.36kg (3lb)
Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions  


STANDARDS:
ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046

Standards in grey have been superseded but are still recognised in some industries.

 

ο Optional Calibration Certificate available

Accessories

KT002020N001 Replacement Scraper for Elcometer 2020
KT002030N001 Replacement Scraper for Elcometer 2041