Product Description
Technical Specification
Instruction Manual
Data Sheet

Elcometer 207 Precision Ultrasonic Thickness Gauge - Discontinued

Replaced by the Elcometer PTG6

The Elcometer 207 series of Precision Ultrasonic Thickness Gauges is designed to provide accurate thickness measurements on thin materials.

All Elcometer 207 and 207DL precision gauges have the special PLAS mode. This is specifically designed to provide accurate readings when measuring thin plastics.

Using the latest transducer designs, the Elcometer 207 precision ultrasonic thickness gauges can accurately measure material thickness from 0.15 - 25.4mm (0.006-1”) without the need to change the measurement mode.


Elcometer 207 & 207DL Precision Ultrasonic Thickness Gauges
Elcometer 207 Ultrasonic Thickness GaugeElcometer 207DL Precision Thickness GaugeElcometer 207DL Precision Ultrasonic Gauge

Technical Specification

Part Number - -
Model Elcometer 207 Elcometer 207DL
PLAS Mode*
Scan & Differential Modes
Alarm Mode
Data Output (immediate)
Data Logging (memory)   1000 readings
ElcoMaster® Software  
Maximum Measurement Range 0.15 - 25.4mm (0.006 - 1”)
Velocity Range 1250 - 10000m/s (0.0492 - 0.3937 in/µs)
Accuracy & Resolution Accuracy(1): ±0.02mm (0.0008”); Resolution: 0.002mm (0.0001”)
Resolution 0.002mm (0.0001”)
Units Millimetres and Inches
Operating Temperature -30°C to 50°C (-20°F to 120°F)
Transducer Each unit is supplied with 15MHz, 6mm (¼”) microdot right angle transducer
Display 114mm (4½) Digit Liquid Crystal Display with backlight
Power AA 1.5V Alkaline or 1.2V NiCad cell
Battery Type (Life) 2 x AA 1.5V batteries (200 hours)
Weight 295g (10oz)
Dimensions 63 x 120 x 31mm (2.5 x 4.5 x 1.24")
Packing List

Elcometer 207 or 207DL gauge, ultrasonic couplant, 2 x batteries, carry case, microdot transducer, calibration certificate and operating instructions.
Elcometer 207DL: CD with ElcoMaster® software and data transfer cable



ASTM E 797, EN 15317


Calibration Certificate supplied as standard

*  To use the PLAS mode, a special Graphite delay line is required which must be ordered separately - see Accessories

 (1)Dependent on material and conditions