The Setaflash ‘Series 3’ Active-Cool Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.
It has been designed to carry out flash/no flash tests rapidly and efficiently to determine the flash point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range. A sample cup is heated and then cooled by Peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.
Flash point is automatically detected using a thermally activated detector, reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with on/off switch and fine adjustment are integral to the unit.
• Flash/No Flash & Ramp Modes
• Flash point test in less than 2 minutes
• Small sample size, 2ml (0.067fl oz) or 4ml (0.135fl oz)
• Automatic flash detection
• Electronic Peltier cooling
• Audible and on-screen prompts
• Corrosion resistant cup insert
|K6910M013||Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool||ο|
|Temperature Range||10°C to 135°C (50°F to 275°F)|
|Test Mode||Rapid Equilibrium and Ramp|
|Sample Size||2ml (0.067fl oz) for flash points up to 100°C (212°F)|
|4ml (0.135fl oz) for flash points above 100°C (212°F)|
|Test Duration||1 minute below 100°C, 2 minutes above 100°C, or user determined 1 to 99 minutes|
|Ramp Rate||2°C/min ramp (3.6°F/min ramp)|
|Cup Material||Corrosion resistant steel insert|
|Dimensions||195 x 295 x 140mm (7.6 x 11.6 x 5.5”)|
|Packing List||Elcometer 6910 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester, 2ml (0.067fl oz) syringe, gas valve & cap, power supply, mains power cable, 2mm Allen key, quality assurance certificate, warranty registration form and operating instructions|
ASTM D1655, ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 2000-523, DEF STAN 91-91, EPA 1020 A & B,
ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids
Standards in grey have been superseded but are still recognised in some industries.
ο Optional Calibration Certificate available
Certified Flash Point Material (50ml/1.7floz)