The Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting) offers the same feature as the Active Cool Closed Cup Tester but comes with a corrosion resisting insert in the cup for testing corrosive samples.
It has been designed to carry out flash/no flash tests with a temperature range of 10°C to 130°C (50°F to 266°F) with no external cooling required. When connected to a suitable chilled water supply, the range is extended down to -20°C (-4°F).
There is also the Ramp Mode which increases the sample temperature at the rate of 2°C/min and automatically dips the ignitor every 1°C up to 100°C (every 2°C above 100°C), until either a flash is detected or the end of test temperature is reached.
• Small sample size, 2ml (0.067fl oz) or 4ml (0.135fl oz)
• Flash/No Flash & Ramp Modes
• Electric ignitor
• Automatic dipping and flash detection
• ActiveCool electronic Peltier cooling
• 64 test memory & RS232 interface
• Corrosion resisting insert
|K6910M022||Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting)||•|
|Temperature Range||Air: 10°C to 130°C (50°F to 266°F)|
|Water Assisted: -20 to 130°C (-4 to 266°F)|
|Sample Size||2ml (0.067fl oz) or 4ml (0.135fl oz) according to method|
|Test Mode||Rapid Equilibrium and Ramp|
|Test Duration Rapid Equilibrium Mode||1 minute below 100°C (212°F)|
|2 minutes above 100°C (212°F)|
|FAME 1 minute or user defined 1 to 99 minutes|
|Test Duration Ramp Mode||Typically 7 minutes|
|Cool Down Time||80°C to 20°C (176°F to 68°F) in 4 minutes|
|Cup Material||Corrosion Resistant Steel Insert, Aluminium Cup|
|Dimensions||300 x 340 x 380mm (11.8 x 13.4 x 15.0”)|
|Packing List||Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting), 2ml (0.067fl oz) syringe, flash detector, mains power cable, programming plug, 2mm Allen key, 2.5mm Allen key, certified flash point material (50ml/1.7fl oz), certificate of calibration, warranty registration form and operating instructions|
ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 2000-523, CLP Regulations EC No 1272/2008, EPA 1020 A & B,
ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids
Standards in grey have been superseded but are still recognised in some industries.
• Calibration Certificate supplied as standard.
Certified Flash Point Material (50ml/1.7floz)