Product Description
Technical Specification
Instruction Manual

Elcometer 2041 Fineness of Grind Gauges - Discontinued

Replaced by the Elcometer 2020 Fineness of Grind Gauge

The Elcometer Fineness of Grind Gauges are used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.

These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).

Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have a tolerance of ±2μm (0.08mil). The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).

Elcometer-2020-2041-Fineness-of-Grind
Elcometer-2020-2041-Fineness-of-Grind-close-up

Technical Specification

Part Number Model Range Hegman (NS) North (PCU) Graduation   Certificate
Metric Imperial   µm mils     µm mils  
- - Elcometer 2041/2 0-25 0-1 - - 2.5 0.1 ο
- - Elcometer 2041/3 - 0-2 - - - 0.2 ο
- - Elcometer 2041/4 0-100 0-4 - - 10 0.5 ο
Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
Weight 1.36kg (3lb)
Packing List Elcometer 2041 Fineness of Grind Gauge, scraper, plastic case and operating instructions  


STANDARDS:
ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046

Standards in grey have been superseded but are still recognised in some industries.

 

ο Optional Calibration Certificate available