Product Description
Technical Specification
Accessories
Data Sheet

Elcometer 1615 Variable Impact Tester Kits

In order to test a sample in accordance with a specified standard, a number of kits have been created to provide a single Impact Tester which, by using the appropriate kit, allows the user to work in accordance with a wide range of National and International standards.

Elcometer Impact Tester Kit A

 

Elcometer Impact Tester Kit A Part Number: KT001615KITA
Standards: ISO 6272:1993, EN 13523, JIS K 5600-5-3. DIN EN ISO 6272-1

Packing List

  • Falling 1kg (2.2lb) weight with a 20mm (0.7") punch
  • Stop collar
  • 27mm (1.06") die with fixing screw
  • Sample clamp with two fixing screws
  • 3mm (0.12") and 4mm (0.15") hexagonal wrench
     
Elcometer Impact Tester Kit B  
     
Elcometer Impact Tester Kit B  Part Number: KT001615KITB
Standards: ASTM D 2794, BS EN ISO 6272-2, ISO 6272-2: 2002, Qualicoat

Packing List

  • Static indenter with 15.9mm (0.6") punch
  • Falling 1kg (2.2lb) weight
  • 12.7mm (0.5") punch
  • 16.3mm (0.64") die with fixing screw
  • 3mm (0.12") hexagonal wrench
     

Elcometer Impact Tester Kit C

     
Elcometer Impact Tester Kit C Part Number: KT001615KITC
Standards: ASTM D 2794, BS6496:1984, EN 12206-1

Packing List

  • Static indenter with 15.9mm (0.6") punch
  • Falling 2lb (908g) weight
  • 16.3mm (0.64") die with fixing screw
  • 3mm (0.12") hexagonal wrench
     

Elcometer Impact Tester Kit D 

     
Elcometer Impact Tester Kit D Part Number: KT001615KITD
Standards: ISO 6272-1, BS EN ISO 6272-1, NF EN ISO 6272-1

Packing List

  • Falling 1kg (2.2lb) weight with 20mm (0.78") punch and stop key
  • 27mm (1.06") die with fixing screw
  • Stop collar
  • Sample clamp with fixing screws
  • 3mm (0.12") and 4mm (0.15") hexagonal wrench
     

Elcometer Impact Tester Kit E

     
Elcometer Impact Tester Kit E Part Number: KT001615KITE
Standards: NF T30-017:1989

Packing List

  • Falling 400g (0.9lb) weight with 23mm (0.90") punch
  • 22mm (0.87") die with fixing screw
  • 3mm (0.12") hexagonal wrench
     

Elcometer Impact Tester Kit F

     
Elcometer Impact Tester Kit F Part Number: KT001615KITF
Standards:

ASTM D 2794, BS EN ISO 6272, DIS EN ISO 6272-1,

EN 13523-5, ISO 6272, Qualicoat 2006, SN EN ISO 6272-1

Packing List

  • Falling 1kg (2.2lb) weight with a 20mm (0.7") punch
  • Stop collar
  • 27mm (1.06") die with fixing screw
  • Sample clamp with two fixing screws
  • 3mm (0.12") and 4mm (0.15") hexagonal wrench
  • Static indenter with 15.9mm (0.6") punch
  • Falling 1kg (2.2lb) weight
  • 12.7mm (0.5") punch
  • 16.3mm (0.64") die with fixing screw
 

 

 

Elcometer Impact Tester Kit G

 

 

 
Elcometer Impact Tester Kit G  

Part Number:

KT001615KITG

Standards:

BS EN ISO 6272-2:2011 

Packing List

  • Falling 1kg (2.2lb) weight with a 15.9mm (0.62”)static indenter with handle and punch
  • 12.7mm (0.5”) static indenter with handle and punch
  • 16.3mm (0.64”) die with fixing screw
  • Guide bracket with two fixing screws
  • 3mm (0.12”) hexagonal wrench
  • 4mm (0.16”) hexagonal wrench
Elcometer 1615 Variable Impact Tester Kit

Technical Specification

Part Number Description Certificate
K0001615KITA Elcometer 1615 Kit A to meet ISO 6272:1993 Standard ο
K0001615KITB Elcometer 1615 Kit B to meet ISO 6272 Part 2:2002 Standard ο
K0001615KITC Elcometer 1615 Kit C to meet ASTM D2794 Method 2, BS6486:1984, EN 12206-1 Standards ο
K0001615KITD Elcometer 1615 Kit D to meet ISO 6272 Part 1:2002, BS EN ISO 6272-1:2004 Standards ο
K0001615KITE Elcometer 1615 Kit E to meet NF T30-017:1989 Standard ο
K0001615KITF Elcometer 1615 Kit F to meet ISO 6272:1993, ISO 6272-2:2002 Standards ο
K0001615KITG Elcometer 1615 Kit G to meet BS EN ISO 6272-2:2011 Standard ο
Packing List Kit A: Sample clamp, 27mm (1.06") die, 1kg (2.2lb) falling weight with a 20mm (0.79") punch, stop collar, 2 x hexagonal wrench and operating instructions 
  Kit B: Indenter with 15.9mm (0.6") punch, die 16.3mm (0.64"), falling 1kg (2.2lb) weight, hexagonal wrench and operating instructions 
  Kit C: Indenter with 15.9mm (0.6") punch, 2lb (0.91kg) falling weight and operating instructions 
  Kit D: 1kg (2.2lb) falling weight with 20mm (0.79") punch, 27mm (1.06") die, stop collar, hexagonal wrench and operating instructions 
  Kit E: 400g (0.88lb) falling weight with a 23mm (0.9") punch, 22mm (0.87") die, sample clamp, hexagonal wrench and operating instructions 
  Kit F: Sample clamp, stop collar, 27mm (1.06") die, 1kg falling indenter with a 20mm (0.79") punch, indenter with 15.9mm (0.6") punch, 12.7mm (0.5") punch, 16.3mm (0.6") die, falling 1kg weight, 2 x hexagonal wrench and operating instructions 
  Kit G: Falling 1kg (2.2lb) weight with a 15.9mm (0.62") static indenter with handle and punch; 12.7mm (0.5") static indenter with handle and punch; 16.3mm (0.64") die with fixing screw; guide bracket with two fixing screws; 3mm (0.12") hexagonal wrench; 4mm (0.16") hexagonal wrench 

 

STANDARDS:
ASTM D 2794:2004, ASTM D 5420, AS/NZS 1580.406.1, BS 6496:1984, BS 3900 E13, ECCA T5, EN 12206-1:2004, EN 13523-5:2001, ISO 6272:1993, ISO 6272-1:2002, ISO 6272-2:2002, JIS K 5600-5-3:1999, NF T30-017:1989

Standards in grey have been superseded but are still recognised in some industries.

 

ο Optional Calibration Certificate available

Accessories

 

Punches are universal and can be used either fitted to a falling weight or as a punch resting on the sample.

   

Suitable for Kit

    A B C D E F G
KT001615N201 Additional 1kg (2.2lb) Falling Weight, 24.6mm (0.97") Diameter      

     
KT001615N221 Additional 1kg (2.2lb) Falling Weight, 25.0mm (0.98 ) Diameter

       

KT001615N226

20mm (0.79”) Diameter Punch (Outside Diameter 25mm)

 

     

 
KT001615N215 12.7mm (0.5") Diameter Punch  

     

 
KT001615N205 15.9mm (0.6") Diameter Punch  

   

 
KT001615N206 20mm (0.79") Diameter Punch      

     
KT001615N207 23mm (0.9") Diameter Punch        

   

KT001615N216

Static Indenter with 12.7mm/0.5” Diameter Punch

       

 

 

KT001615N217

Static Indenter with 15.9mm/0.6” Diameter Punch

       

 

 

KT001615N208 Stop Ring Collar

   

 

 
KT001615N209 Sample Clamp Mechanism

   

 

 
KT001615N210 Weight Release Mechanism

KT001615N211 Replacement Graduated Tube

KT001615N212 16.3mm (0.64") Die  

   

 

KT001615N232

16.3mm (0.64”) Die (with 1.5mm Radius)

 

 

 

   

 

KT001615N213 22mm (0.67") Die        

   
KT001615N214 27mm (1.06") Die