Product Description
Technical Specification
Accessories

Elcometer 182 Digital Concrete Test Hammer - Discontinued

 

Replaced by the Elcometer 181 Analogue Concrete Test Hammer

The Elcometer 182 Digital Concrete Test Hammer is equipped with an electronic transducer which converts the rebound values into a reading on the digital display.

It displays a range of statistics and there is a facility to download to a PC.

The software and digital display are integrated into the design of the hammer.

  • Light and easy to use
  • High resolution and accuracy
  • Possibility to store measurements and download data to PC
  • Setting of test parameters and factors (age, shape, correction factors)
  • Rapid and simple calibration procedure
  • Selection of testing angle
  • Selection of unit (N/mm2, MPa, PSI, kgf/cm2) Automatic conversion of rebound index to equivalent compression strength
  • Selection between 7 different correlation curves between rebound index and compressive strength, 2 pre-set and 5 user definable
  • Statistical evaluation of test results (mean value, standard deviation, concrete strength estimation)
  • Supplied with abrasive stone to prepare test surface
  • Storage of up to 5,000 results
  • RS 232 output to PC
  • Rechargeable internal battery
Elcometer 182 Digital Concrete Test Hammer

Technical Specification

Part Number

Description

Certificate

-

Elcometer 182 Digital Concrete Test Hammer

Impact Energy

2.207 Nm

 

Accuracy

Better than ± 2 Rebound Number(s) (When tested on Calibration Anvil at 80)

 

Resolution

0.1 Rebound Number

 

Range

10 to 70 MPa

 

Memory

5000 tests

 

Unit Selection N/mm2; MPa; kg/cm2; PSI  
Autonomy (Continous Use) >5 Hours  
Dimensions

Hammer: 280mm (11.02") length x 55mm (2.17") diameter

In Case: 190 x 100 x 350mm (7.48" x 3.94" x 13.78")

 

Weight

2kg (4.4lbs) with case

 

Packing List

Hammer, battery charger (UK, EUR & US), serial cable for PC, abrasive stone, instruction manual, calibration certificate and carry case

 

STANDARDS:

ASTM C805, BS 1881:202, DIN 1048, EN 12504-2, ISO 8045, NFP18-417, UNI 9189

 

Calibration Certificate supplied as standard

Accessories

- Calibration Anvil (supplied complete with Test Certificate)
- Replacement Mains Adaptor, UK 240V

-

Replacement Mains Adaptor, EUR 220V

-

Replacement Mains Adaptor, US 110V