Product Description
Technical Specification
Accessories
Instruction ManualData Sheet
Videos

Elcometer 122 Testex® Replica Tape

The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.

Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

Elcometer 122 Testex® Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.

  • For surface profiles between 12 & 25µm (0.5 & 1.0mils): Coarse Minus Tape
  • For surface profiles between 20 & 38µm (0.8 & 1.5mils): Coarse Tape
  • For surface profiles between 38 & 64µm (1.5 & 2.5mils): Average of Coarse and X-Coarse Tape
  • For surface profiles between 64 & 115µm (2.5 & 4.5mils): X-Coarse Tape
  • For surface profiles greater than 115µm (4.5mils): X-Coarse Plus Tape

There are 50 tests in each Replica Tape roll.

Elcometer 122 Testex® Replica Tape

Technical Specification

Description Profile Range Part Number
    1 Roll Pack of 10 Pack of 50 Pack of 100

Elcometer 122 Coarse Minus

12 - 25μm (0.5 to 1mil) E122----A1 E122----A10 E122----A50 E122----A100

Elcometer 122 Coarse

20 - 64μm (0.8 - 2.5mils)

E122----B1

E122----B10

E122----B50

E122----B100

Elcometer 122 X-Coarse 38 - 115μm (1.5 - 4.5mils) E122----C1 E122----C10 E122----C50 E122----C100
Elcometer 122 X-Coarse Plus 115 - 127μm (4.5 - 5.0mils) E122----F1 E122----F10 E122----F50 E122----F100

Accuracy Statement


Profile Error (Coarse) Error (X-Coarse)
mils microns mils microns mils microns
1.0 25 0.3 8 not applicable
2.0 50 not applicable 0.8 18
3.0 75 not applicable 1.1 27
4.0 100 not applicable 1.5 37


STANDARDS:
ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000

Standards in grey have been superseded but are still recognised in some industries.

 

Accessories

T12222498 Swizzle Sticks (Pack of 5)

 

Videos

SURFACE PROFILE

Measuring surface profile using the Elcometer 122 Replica Tape & Elcometer 124 Thickness Gauge

The Elcometer 122 Replica Tape, when used in conjunction with the Elcometer 124 Thickness Gauge, provides an ideal method for measuring surface profile in compliance with International Standards. With four variants of the replica tape available, the Elcometer 122 is ideal for inspecting different surface profiles of flat, curved or hard to reach areas.

 

Click here to download the video script in English.