Product Description
Technical Specification
Accessories
Instruction ManualData Sheet

Elcometer 138 Abrasive Soluble Salt Test Kit – ASTM D4940

Abrasives used for blast cleaning surfaces can be contaminated with soluble salts due to the source or the re-use of the blasting media.

This contamination can be transferred to the blast cleaned surface and result in accelerated corrosion conditions and also cause premature coating failure, if this contamination is not removed prior to applying the coating.

Testing abrasives on site for soluble salt contamination can be carried out quickly and easily using the Elcometer 138 Abrasive Soluble Salt Test Kit, according to the ASTM D4940 method.

A measured volume of the abrasive is mixed with the same volume of water and agitated to allow any soluble salts to dissolve in the water. The resulting slurry is allowed to settle and the filtered water can then be tested using a conductivity meter.

The Elcometer 138 Abrasive Soluble Salt Test Kit provides all that is needed to carry out the test in the field or in the laboratory.

The Elcometer 138 Abrasive Soluble Salt Test Kit – ASTM D4940 contains:

 

  • Elcometer 138E Conductivity Meter
  • Standard 1413 μS/cm (1.413 mS/cm) Calibration Solution, 1 x 20ml (0.74 fl oz) Single Use Pouch
  • Bottle of Pure Distilled Water; 1000ml (33.8 fl oz)
  • Glass Beaker; 100ml (3.4 fl oz)
  • Glass Beaker; 600ml (20.3 fl oz)
  • Plastic Measuring Beaker; 500ml (16.9 lf oz)
  • Funnel
  • Stirring Rod
  • Filter Papers; Box of 100
  • LR44 Alkaline Batteries, Transit Case & User Guide
 
Elcometer 138 Abrasive Soluble Salt Test Kit
Elcometer 138E Conductivity Meter

Technical Specification

Part Number Description
E138-A Elcometer 138 Abrasive Soluble Salt Test Kit with Elcometer 138E Conductivity Meter
Measurement Range 0 μS/cm to 200.0 μS/cm, 0 μS/cm to 2000 μS/cm, 0 mS/cm to 20.00 mS/cm
Accuracy 1% full scale (see Elcometer 138E Conductivity Meter for full specification)
Dimensions 456 x 384 x 127mm (18 x 15.1 x 5”)
Weight 2.2kg (4lb 14oz)
Packing List

Elcometer 138E Conductivity Meter, 1000ml (33.8 fl oz) bottle of pure distilled water, 100ml & 600ml (3.4 & 20.3 fl oz) glass beakers,
500ml (16.9fl oz) plastic measuring beaker, funnel, stirring rod, box of 100 filter papers, 1 x 20ml (0.74fl oz) standard 1413 μS/cm (1.413 mS/cm) calibration solution, 4 x LR44 batteries, transit case and user guide

Accessories

Part Number Description
T13827355 Elcometer 138E Conductivity Meter
T13827455 Replacement Sensor for Conductivity Meter
T13827352-1 Standard 447 µS/cm (0.447 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches
T13827352-2 Standard 1413 µS/cm (1.413 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches
T13827352-3 Standard 15000 µS/cm (15 mS/cm) Calibration Solution – 4 x 20ml (0.74fl oz) Single Use Pouches
T13827494 Pure Distilled Water 1000ml (33.8fl oz) Bottle
T13827495 Glass Beaker 100ml (3.4fl oz)
T13827496 Glass Beaker 600ml (20.3fl oz)
T13827498 Plastic Measuring Beaker 500ml (16.9fl oz)
T13827497 Funnel
T13827499 Stirring Rod
T13827500 Box of 100 Filter Papers