Product Description
Technical Specification
Instruction Manual
Data Sheet

Elcometer 134A Chloride Ion Test Kit for Abrasives

The Elcometer 134A Chloride Ion Test Kit for Abrasives is used to test the recycled abrasives for the presence of chloride salts that may contaminate the cleaned surface.

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.

Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures.

Elcometer 134A Chloride Ion Test Kit for Abrasives

Technical Specification

Part Number Description
E134----2 Elcometer 134A Chloride Ion Test Kit for Abrasives
Measurement Range 1 - 60µg/cm² (1 - 60ppm)
Scale Resolution 1µg/cm² (1ppm)
Sample Time 1.5 minutes (approx)
Tests per kit 4
Storage Conditions Not exceeding 25°C (77°F)
Weight 367g (13oz)
Dimensions 185 x 125 x 110mm (7 x 5 x 4.5”)
Packing List 4 x test kits, containing: abrasive sample container, mixing container with a pre-measured quantity of solution, titration tube, titration tube snapper, strap and operating instructions