Product Description
Technical Specification
Instruction Manual
Data Sheet

Elcometer 7000 Digital Moisture Meters

The Elcometer 7000 range offers accurate and easy to use moisture measurement.

Available in two versions, the Concrete Moisture Meter has a non-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.

The Digital Moisture Meter has two pin probes that allows the gauge to be pressed on to a surface and take a measurement of the immediate area and also has a non-invasive probe on the back of the gauge for moisture detection.

  • Calibrated ready for use
  • Instant readings on a clear, easy to read scale
  • Fully portable, battery operated and non-destructive

 

Types of Moisture Meters

On porous materials such as concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance.

It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.

When powder coating wooden panels, for example, if the wood (or mdf) has too high a moisture content, as the panel passes through the oven, the moisture is heated, generating steam – causing significant coating finish issues.

Applying a coating to a concrete floor which is too damp can cause premature adhesion failure. Moisture meters have been developed to specifically determine the level of moisture in a substrate and come in two forms:

Pin-type moisture meters: Invasive pins are pushed firmly into the surface of the substrate being measured and by measuring the electrical resistance between the pin electrodes provide the percentage moisture content (%MC) in the substrate.

Pinless, contact-type moisture meters: Whilst pinless meters typically measure moisture content faster and are non-destructive they do require a relatively flat surface because the sensors are mounted on the base of the gauge making them ideal for concrete.

Elcometer 7000 Digital Moisture Meters
Elcometer 7000 Pinless Moisture MeterElcometer 7000 Pin-type Moisture MeterElcometer 7000PS Digital Moisture Meter

Technical Specification

 

Model Elcometer 7000S Concrete Moisture Meter Elcometer 7000PS Digital Moisture Meter Certificate
Part Number G7000S G7000PS ο
Measuring Range 70 to 999 relative (non-invasive)

Dry (green); 70 - 169

At risk (yellow); 170 - 199

Wet (red); 200 - 999

70 to 999 relative (non-invasive)

Dry (green); 70 - 169

At risk (yellow); 170 - 199

Wet (red); 200 - 999

7.9% to 99% WME (pin measurement)

Dry (green); 7 - 16.9

At Risk (yellow); 17 - 19.9

Wet (red); 20 - 99.9

 
Measurement Depth

 Non-invasive up to 19mm (3/4")

Non-invasive up to 19mm (3/4")

Pin up to 12.7mm (1/2")

 
Display

LCD Display with separate colour indicators

Dimensions

175 x 48 x 50mm (7.0 x 1.9 x 2.0")

190 x 70 x 49mm (7.5 x 2.75 x 1.9")  
Weight

195g (7oz)

225g (8oz)  
Power Supply

9V battery (~ 20 hours continuous use)

Packing list Elcometer 7000 Moisture Meter, HD MC probe (Model PS), Deep Wall probe 127mm (5") (Model PS), pin calibration check (Model PS), wood calibration chart (Model PS), battery, carry case and operating instructions 

 

ο Optional Calibration Certificate available for Elcometer 7000PS Digital Mositure Meter only

Instruction Manual