Elcometer Qualicoat Powder Coating Inspection Kit

  • Protective Coatings
  • Industrial Finishing
qualicoat-powder-kit-small
Elcometer-215-Oven-data-logger-small

The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of the Qualicoat Organisation.

  • Summary
    • Summary

    • The Qualicoat Organisation brings together the ideals of several National Coating Associations into one quality label for powder coatings on aluminium architectural components. Qualicoat has established Specifications defining minimum requirements for the plant, test equipment, coating materials and finished products.

      Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.

      Measurement parameters include:

      • Appearance 
      • Impact and deformation
      • Oven temperature
      • Coating thickness
      • Adhesion

  • Key Features
    • Key Features

      Elcometer Qualicoat Powder Coating Inspection Kit

      Kit Contents:

      ModelDescriptionBasicTop
      Elcometer 480Statistical Glossmeter: 60°Model BModel T
      Elcometer 1506Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels
      Elcometer 1615Base Unit and Tube Assembly
      Elcometer 1615Kit B: ISO 6272/2 and BS 6496
      Elcometer 1620Manual Cupping Tester with Digital Gauge
      Elcometer 215Oven Data Logger & Kit*StandardTop
      Elcometer 415FNF Integral Digital Coating Thickness Gauge for smooth surfaces
      Elcometer 456

      FNF Separate Digital Coating Thickness Gauge

      Model T
      Elcometer 456Standard FNF 1 Probe, 0 - 1500μm
      Elcometer 1542Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape

      Individual Instruments can be used in accordance with many other tests.

      *A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately.

  • Technical Information
    • Technical Specification
      Elcometer Qualicoat Powder Coating Inspection Kit
      Part Number Description
      Basic Top  
      YKITQUALICOAT-1B YKITQUALICOAT-1T Elcometer Qualicoat Powder Coatings Inspection Kit
      Part Number
      Basic Top
      YKITQUALICOAT-1B YKITQUALICOAT-1T
      Description Elcometer Qualicoat Powder Coatings Inspection Kit
  • Downloads
    • Downloads
        • Elcometer Qualicoat Powder Coating Inspection Kit Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer Qualicoat Powder Coating Inspection Kit
      • Elcometer Basic Qualicoat Powder Coatings Inspection Kit
        • Part Number : YKITQUALICOAT-1B
      • Elcometer Top Qualicoat Powder Coatings Inspection Kit
        • Part Number : YKITQUALICOAT-1T

Elcometer Qualicoat Powder Coating Inspection Kit

  • Protective Coatings
  • Industrial Finishing
qualicoat-powder-kit-small
Elcometer-215-Oven-data-logger-small

The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of the Qualicoat Organisation.

Summary

Elcometer Qualicoat Powder Coating Inspection Kit

The Qualicoat Organisation brings together the ideals of several National Coating Associations into one quality label for powder coatings on aluminium architectural components. Qualicoat has established Specifications defining minimum requirements for the plant, test equipment, coating materials and finished products.

Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.

Measurement parameters include:

  • Appearance 
  • Impact and deformation
  • Oven temperature
  • Coating thickness
  • Adhesion

Downloads
    • Elcometer Qualicoat Powder Coating Inspection Kit Datasheet

Key Features

Elcometer Qualicoat Powder Coating Inspection Kit

Kit Contents:

ModelDescriptionBasicTop
Elcometer 480Statistical Glossmeter: 60°Model BModel T
Elcometer 1506Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels
Elcometer 1615Base Unit and Tube Assembly
Elcometer 1615Kit B: ISO 6272/2 and BS 6496
Elcometer 1620Manual Cupping Tester with Digital Gauge
Elcometer 215Oven Data Logger & Kit*StandardTop
Elcometer 415FNF Integral Digital Coating Thickness Gauge for smooth surfaces
Elcometer 456

FNF Separate Digital Coating Thickness Gauge

Model T
Elcometer 456Standard FNF 1 Probe, 0 - 1500μm
Elcometer 1542Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape

Individual Instruments can be used in accordance with many other tests.

*A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately.

Technical Specification
Elcometer Qualicoat Powder Coating Inspection Kit
Part Number Description
Basic Top  
YKITQUALICOAT-1B YKITQUALICOAT-1T Elcometer Qualicoat Powder Coatings Inspection Kit
Part Number
Basic Top
YKITQUALICOAT-1B YKITQUALICOAT-1T
Description Elcometer Qualicoat Powder Coatings Inspection Kit
Part Numbers
Elcometer Qualicoat Powder Coating Inspection Kit
  • Elcometer Basic Qualicoat Powder Coatings Inspection Kit
    • Part Number : YKITQUALICOAT-1B
  • Elcometer Top Qualicoat Powder Coatings Inspection Kit
    • Part Number : YKITQUALICOAT-1T