Elcometer 3025 Scratch/Shear Tester

  • Industrial Finishing
3025-intro-image
3025-intro-image1

The Elcometer 3025 Scratch/Shear Tester is used to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving.

  • Summary
    • Summary

    • This portable tester measures materials up to 12.7mm (½”) thick by 101mm (4”) square or round.

      The height of the scale beam is adjusted by the user to match the thickness of the sample. The tool, a conical diamond tip, is then placed on the sample and the instrument is activated by the user with the On/Off switch.

      The tip leaves a trace mark and the extent of this, in relation to the load used, indicates the degree of coating or material hardness. The turntable rotates at a constant 5rpm to ensure repeatability and reproducibility of tests. By changing the load on the tool, from 0 to 1000g (0-2.2lb), the sample’s scratch resistance can be evaluated.

      Sample Cutter

      The Sample Cutter cuts precise 106mm (4.2”) circular samples with a 6.35mm (0.25”) centre hole to prepare specimens for use with the Taber® Abrasers.

      An easy counter-clockwise cutting motion allows the user to cut a variety of materials. Optional pads allowing cutting thicknesses of 0.03mm (0.001”), 4.74mm (0.187”) and 6.35mm (0.25”) are available.

  • Technical Information
    • Technical Specification
      Elcometer 3025 Scratch/Shear Tester
      Part Number Description
      UK 240V EUR 220V US 110V  
      K0UK3025M001 K0003025M001 K0003025M001 Elcometer 3025 Scratch/Shear Tester (UK 240V)
      Dimensions 445 x 190 x 150mm (17 x 7.8 x 6”)
      Weight 6.8kg (14.9lb)
      Packing List Elcometer 3025 and operating instructions
      Part Number
      UK 240V EUR 220V US 110V
      K0UK3025M001 K0003025M001 K0003025M001
      Description Elcometer 3025 Scratch/Shear Tester (UK 240V)
      Dimensions 445 x 190 x 150mm (17 x 7.8 x 6”)
      Weight 6.8kg (14.9lb)
      Packing List Elcometer 3025 and operating instructions
  • Standards
    • Standards
      Elcometer 3025 Scratch/Shear Tester

      EN 438-2, ISO 4586-2

  • Downloads
    • Downloads
        • Elcometer 3025 Scratch/Shear Tester Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 3025 Scratch/Shear Tester
      • Elcometer 3025 Scratch/Shear Tester (UK 240V)
        • Voltage: UK 240V
        • Part Number : K0UK3025M001
      • Elcometer 3025 Scratch/Shear Tester (EUR 220V)
        • Voltage: EUR 220V
        • Part Number : K0003025M001
      • Elcometer 3025 Scratch/Shear Tester (US 110V )
        • Voltage: US 110V
        • Part Number : K0US3025M001
  • Accessories
    • Accessories
      Elcometer 3025 Scratch/Shear Tester
      • Part Number: ST985000
      • Part Number: ST131569
      • Part Number: ST131570
      • Part Number: KT003025P007

Elcometer 3025 Scratch/Shear Tester

  • Industrial Finishing
3025-intro-image
3025-intro-image1

The Elcometer 3025 Scratch/Shear Tester is used to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving.

Summary

Elcometer 3025 Scratch/Shear Tester

This portable tester measures materials up to 12.7mm (½”) thick by 101mm (4”) square or round.

The height of the scale beam is adjusted by the user to match the thickness of the sample. The tool, a conical diamond tip, is then placed on the sample and the instrument is activated by the user with the On/Off switch.

The tip leaves a trace mark and the extent of this, in relation to the load used, indicates the degree of coating or material hardness. The turntable rotates at a constant 5rpm to ensure repeatability and reproducibility of tests. By changing the load on the tool, from 0 to 1000g (0-2.2lb), the sample’s scratch resistance can be evaluated.

Sample Cutter

The Sample Cutter cuts precise 106mm (4.2”) circular samples with a 6.35mm (0.25”) centre hole to prepare specimens for use with the Taber® Abrasers.

An easy counter-clockwise cutting motion allows the user to cut a variety of materials. Optional pads allowing cutting thicknesses of 0.03mm (0.001”), 4.74mm (0.187”) and 6.35mm (0.25”) are available.

Downloads
    • Elcometer 3025 Scratch/Shear Tester Datasheet

Technical Specification
Elcometer 3025 Scratch/Shear Tester
Part Number Description
UK 240V EUR 220V US 110V  
K0UK3025M001 K0003025M001 K0003025M001 Elcometer 3025 Scratch/Shear Tester (UK 240V)
Dimensions 445 x 190 x 150mm (17 x 7.8 x 6”)
Weight 6.8kg (14.9lb)
Packing List Elcometer 3025 and operating instructions
Part Number
UK 240V EUR 220V US 110V
K0UK3025M001 K0003025M001 K0003025M001
Description Elcometer 3025 Scratch/Shear Tester (UK 240V)
Dimensions 445 x 190 x 150mm (17 x 7.8 x 6”)
Weight 6.8kg (14.9lb)
Packing List Elcometer 3025 and operating instructions
Standards
Elcometer 3025 Scratch/Shear Tester

EN 438-2, ISO 4586-2

Part Numbers
Elcometer 3025 Scratch/Shear Tester
  • Elcometer 3025 Scratch/Shear Tester (UK 240V)
    • Voltage: UK 240V
    • Part Number : K0UK3025M001
  • Elcometer 3025 Scratch/Shear Tester (EUR 220V)
    • Voltage: EUR 220V
    • Part Number : K0003025M001
  • Elcometer 3025 Scratch/Shear Tester (US 110V )
    • Voltage: US 110V
    • Part Number : K0US3025M001
   
Accessories
Elcometer 3025 Scratch/Shear Tester
  • Part Number: ST985000
  • Part Number: ST131569
  • Part Number: ST131570
  • Part Number: KT003025P007