Elcometer 3000 Manual Clemen Unit
- Industrial Finishing
The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.
- Summary
-
Summary
-
A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).
Depending on the load applied, varying degrees of penetration of the tool into the coating can be observed - from a superficial trace to total destruction.
-
- Technical Information
-
Technical SpecificationElcometer 3000 Manual Clemen Unit
Part Number Description Certificate K0003000M001 Elcometer 3000 Manual Clemen Unit Sample Width 75mm (2.95”) Variable Load 0 - 2000g (70.5oz) Dimensions 410 x 200 x 155mm (16.1 x 7.9 x 6.1”) Weight 6kg (13.2lb) Packing List Elcometer 3000 Manual, 1mm (0.04”) ball tool and operating instructions ○ Optional Calibration Certificate available.
-
- Standards
-
StandardsElcometer 3000 Manual Clemen Unit
AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2019, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries
-
- Downloads
-
Downloads
- Part Numbers
-
Part NumbersElcometer 3000 Manual Clemen UnitNo data found!!
-
Elcometer 3000 Manual Clemen Unit
- Part Number : K0003000M001
-
Elcometer 3000 Manual Clemen Unit
- Part Number : K0003000M001C
- Accessories
-
AccessoriesElcometer 3000 Manual Clemen Unit
-
Part Number: KT007210M001
-
Part Number: KT003025P007
-
Part Number: KT003000P021
-
Part Number: KT003000N001
-
Part Number: KT003000N013
-
Part Number: KT003000N015
-
-
- Home
- Coatings Inspection
- Coatings Inspection Division
- Hardness & Scratch Resistance
- Elcometer 3000 Manual Clemen Unit
Elcometer 3000 Manual Clemen Unit
- Industrial Finishing
The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.
Summary
Elcometer 3000 Manual Clemen Unit
A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).
Depending on the load applied, varying degrees of penetration of the tool into the coating can be observed - from a superficial trace to total destruction.
Technical SpecificationElcometer 3000 Manual Clemen UnitPart Number Description Certificate K0003000M001 Elcometer 3000 Manual Clemen Unit Sample Width 75mm (2.95”) Variable Load 0 - 2000g (70.5oz) Dimensions 410 x 200 x 155mm (16.1 x 7.9 x 6.1”) Weight 6kg (13.2lb) Packing List Elcometer 3000 Manual, 1mm (0.04”) ball tool and operating instructions ○ Optional Calibration Certificate available.StandardsElcometer 3000 Manual Clemen UnitAS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, EN 13523-12, ISO 1518-1:2019, JIS K 5600-5-5
Standards in grey have been superseded but are still recognised in some industries
Part NumbersElcometer 3000 Manual Clemen UnitNo data found!!-
Elcometer 3000 Manual Clemen Unit
- Part Number : K0003000M001
-
Elcometer 3000 Manual Clemen Unit
- Part Number : K0003000M001C
AccessoriesElcometer 3000 Manual Clemen Unit-
Part Number: KT007210M001
-
Part Number: KT003025P007
-
Part Number: KT003000P021
-
Part Number: KT003000N001
-
Part Number: KT003000N013
-
Part Number: KT003000N015
- Part Numbers
-