Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere.
- Summary
-
Summary
-
Featuring an aluminium jacket which provides strength and endurance, this abrasive blast nozzle is recommended for use with harder abrasives. The abrasive blast nozzles are supplied with a rubber gasket.
-
- Technical Information
-
Technical SpecificationTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Part Number Nozzle No. Orifice Diameter Length Blast Nozzle Entry Diameter MT28326-3* #3 4.8mm (0.19") 120mm (4.72") 25mm (1") MT28326-4* #4 6.35mm (0.25") 150mm (5.9") 25mm (1") MT28326-5* #5 8mm (0.31") 160mm (6.3") 25mm (1") MT28326-6* #6 9.5mm (0.38") 2" Contractor Thread: 175mm (6.89")
1 1/4" NPSM Thread: 6.69" (170mm)25mm (1") MT28326-7* #7 11mm (0.44") 210mm (8.27") 25mm (1") MT28326-8* #8 12.5mm (0.5") 230mm (9.05") 25mm (1") Part Number MT28326-3* Nozzle No. #3 Orifice Diameter 4.8mm (0.19") Length 120mm (4.72") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Length 150mm (5.9") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Length 160mm (6.3") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Length 2" Contractor Thread: 175mm (6.89")
1 1/4" NPSM Thread: 6.69" (170mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-7* Nozzle No. #7 Orifice Diameter 11mm (0.44") Length 210mm (8.27") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-8* Nozzle No. #8 Orifice Diameter 12.5mm (0.5") Length 230mm (9.05") Blast Nozzle Entry Diameter 25mm (1") * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
-
- Downloads
-
Downloads
-
Elcometer Blast Nozzles - Data Sheet
-
Elcometer Blast Nozzles - Data Sheet ASME
- Part Numbers
-
Part NumbersTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3- Part Number : MT28326-3*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4- Part Number : MT28326-4*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5- Part Number : MT28326-5*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6- Part Number : MT28326-6*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7- Part Number : MT28326-7*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8- Part Number : MT28326-8*
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere.
Summary
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System
Featuring an aluminium jacket which provides strength and endurance, this abrasive blast nozzle is recommended for use with harder abrasives. The abrasive blast nozzles are supplied with a rubber gasket.
Technical SpecificationTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet SystemPart Number Nozzle No. Orifice Diameter Length Blast Nozzle Entry Diameter MT28326-3* #3 4.8mm (0.19") 120mm (4.72") 25mm (1") MT28326-4* #4 6.35mm (0.25") 150mm (5.9") 25mm (1") MT28326-5* #5 8mm (0.31") 160mm (6.3") 25mm (1") MT28326-6* #6 9.5mm (0.38") 2" Contractor Thread: 175mm (6.89")
1 1/4" NPSM Thread: 6.69" (170mm)25mm (1") MT28326-7* #7 11mm (0.44") 210mm (8.27") 25mm (1") MT28326-8* #8 12.5mm (0.5") 230mm (9.05") 25mm (1") Part Number MT28326-3* Nozzle No. #3 Orifice Diameter 4.8mm (0.19") Length 120mm (4.72") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Length 150mm (5.9") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Length 160mm (6.3") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Length 2" Contractor Thread: 175mm (6.89")
1 1/4" NPSM Thread: 6.69" (170mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-7* Nozzle No. #7 Orifice Diameter 11mm (0.44") Length 210mm (8.27") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28326-8* Nozzle No. #8 Orifice Diameter 12.5mm (0.5") Length 230mm (9.05") Blast Nozzle Entry Diameter 25mm (1") * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'Part NumbersTungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.3
- Part Number (2" Contractor Thread): MT28326-3C
- Part Number (1¼" NPSM Thread) : MT28326-3N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.4
- Part Number (2" Contractor Thread): MT28326-4C
- Part Number (1¼" NPSM Thread) : MT28326-4N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.5
- Part Number (2" Contractor Thread): MT28326-5C
- Part Number (1¼" NPSM Thread) : MT28326-5N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.6
- Part Number (2" Contractor Thread): MT28326-6C
- Part Number (1¼" NPSM Thread) : MT28326-6N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.7
- Part Number (2" Contractor Thread): MT28326-7C
- Part Number (1¼" NPSM Thread) : MT28326-7N
-
Tungsten Carbide Venturi Liner with Aluminium Jacket & Water Jet System No.8
- Part Number (2" Contractor Thread): MT28326-8C
- Part Number (1¼" NPSM Thread) : MT28326-8N
-
-