Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
This abrasive blast nozzle offers a 35% larger blast pattern than a standard Venturi nozzle with only a small loss in abrasive velocity.
- Summary
-
Summary
-
Designed to be used on jobs where a more even dispersion of abrasive is required through a larger blast pattern. Supplied with a rubber gasket, it is ideally suited for use with plastic and cereal type abrasive media.
-
- Technical Information
-
Technical SpecificationTungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
Part Number Nozzle No. Orifice Diameter Length Blast Nozzle Entry Diameter MT28346-4* #4 6.35mm (0.25") 149mm (5.86") 25mm (1") MT28346-5* #5 8mm (0.31") 162mm (6.37") 25mm (1") MT28346-6* #6 9.5mm (0.38") 176mm (6.92") 25mm (1") MT28346-7* #7 11mm (0.44") 216mm (8.50") 25mm (1") MT28346-8* #8 12.5mm (0.5") 235mm (9.25") 25mm (1") Part Number MT28346-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Length 149mm (5.86") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Length 162mm (6.37") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Length 176mm (6.92") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-7* Nozzle No. #7 Orifice Diameter 11mm (0.44") Length 216mm (8.50") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-8* Nozzle No. #8 Orifice Diameter 12.5mm (0.5") Length 235mm (9.25") Blast Nozzle Entry Diameter 25mm (1") * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'
-
- Downloads
-
Downloads
-
Elcometer Blast Nozzles - Data Sheet
-
Elcometer Blast Nozzles - Data Sheet ASME
- Part Numbers
-
Part NumbersTungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.4- Part Number : MT28346-4*
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.5- Part Number : MT28346-5*
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.6- Part Number : MT28346-6*
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.7- Part Number : MT28346-7*
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.8- Part Number : MT28346-8*
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
This abrasive blast nozzle offers a 35% larger blast pattern than a standard Venturi nozzle with only a small loss in abrasive velocity.
Summary
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket
Designed to be used on jobs where a more even dispersion of abrasive is required through a larger blast pattern. Supplied with a rubber gasket, it is ideally suited for use with plastic and cereal type abrasive media.
Technical SpecificationTungsten Carbide Double Venturi Blast Nozzle with Aluminium JacketPart Number Nozzle No. Orifice Diameter Length Blast Nozzle Entry Diameter MT28346-4* #4 6.35mm (0.25") 149mm (5.86") 25mm (1") MT28346-5* #5 8mm (0.31") 162mm (6.37") 25mm (1") MT28346-6* #6 9.5mm (0.38") 176mm (6.92") 25mm (1") MT28346-7* #7 11mm (0.44") 216mm (8.50") 25mm (1") MT28346-8* #8 12.5mm (0.5") 235mm (9.25") 25mm (1") Part Number MT28346-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Length 149mm (5.86") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Length 162mm (6.37") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Length 176mm (6.92") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-7* Nozzle No. #7 Orifice Diameter 11mm (0.44") Length 216mm (8.50") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28346-8* Nozzle No. #8 Orifice Diameter 12.5mm (0.5") Length 235mm (9.25") Blast Nozzle Entry Diameter 25mm (1") * For 2" Contractor Thread variants, replace the asterisk in part numbers with a 'C'
For 1¼" NPSM Thread variants, replace the asterisk in part numbers with an 'N'Part NumbersTungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28346-4C
- Part Number (1¼" NPSM Thread) : MT28346-4N
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.5
- Part Number (2" Contractor Thread): MT28346-5C
- Part Number (1¼" NPSM Thread) : MT28346-5N
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28346-6C
- Part Number (1¼" NPSM Thread) : MT28346-6N
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.7
- Part Number (2" Contractor Thread): MT28346-7C
- Part Number (1¼" NPSM Thread) : MT28346-7N
-
Tungsten Carbide Double Venturi Blast Nozzle with Aluminium Jacket No.8
- Part Number (2" Contractor Thread): MT28346-8C
- Part Number (1¼" NPSM Thread) : MT28346-8N
-
-