Tungsten Carbide 45° Angled Liner with Aluminium Jacket

The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes.

Summary
- Summary
- The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.

Technical Specification

Part Number	Nozzle No.	Orifice Diameter	Number of Holes	Length	Blast Nozzle Entry Diameter
MT28442-4*	#4	6.35mm (0.25")	1	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)	25mm (1")
MT28443-4*	#4	6.35mm (0.25")	2	88mm (3.46")	25mm (1")
MT28444-4*	#4	6.35mm (0.25")	3	88mm (3.46")	25mm (1")
MT28442-6*	#6	9.5mm (0.38")	1	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)	25mm (1")
MT28443-6*	#6	9.5mm (0.38")	2	88mm (3.46")	25mm (1")
MT28444-6*	#6	9.5mm (0.38")	3	88mm (3.46")	25mm (1")

Part Number	MT28442-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	1
Length	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28443-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	2
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28444-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	3
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28442-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	1
Length	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28443-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	2
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28444-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	3
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")

Downloads
- Downloads
  Elcometer Blast Nozzles - Data Sheet
  
  Elcometer Blast Nozzles - Data Sheet ASME
Part Numbers
- Part Numbers
  
  Tungsten Carbide 45° Angled Liner with Aluminium Jacket
  No data found!!
  - 1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
    
    Part Number : MT28442-4*
  - 2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
    
    Part Number : MT28443-4*
  - 3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
    
    Part Number : MT28444-4*
  - 1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
    
    Part Number : MT28442-6*
  - 2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
    
    Part Number : MT28443-6*
  - 3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
    
    Part Number : MT28444-6*

The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.

Downloads

Technical Specification

Tungsten Carbide 45° Angled Liner with Aluminium Jacket

Part Number	Nozzle No.	Orifice Diameter	Number of Holes	Length	Blast Nozzle Entry Diameter
MT28442-4*	#4	6.35mm (0.25")	1	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)	25mm (1")
MT28443-4*	#4	6.35mm (0.25")	2	88mm (3.46")	25mm (1")
MT28444-4*	#4	6.35mm (0.25")	3	88mm (3.46")	25mm (1")
MT28442-6*	#6	9.5mm (0.38")	1	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)	25mm (1")
MT28443-6*	#6	9.5mm (0.38")	2	88mm (3.46")	25mm (1")
MT28444-6*	#6	9.5mm (0.38")	3	88mm (3.46")	25mm (1")

Part Number	MT28442-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	1
Length	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28443-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	2
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28444-4*
Nozzle No.	#4
Orifice Diameter	6.35mm (0.25")
Number of Holes	3
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28442-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	1
Length	2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm)
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28443-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	2
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")
Part Number	MT28444-6*
Nozzle No.	#6
Orifice Diameter	9.5mm (0.38")
Number of Holes	3
Length	88mm (3.46")
Blast Nozzle Entry Diameter	25mm (1")

Part Numbers

Tungsten Carbide 45° Angled Liner with Aluminium Jacket

1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28442-4C
- Part Number (1¼" NPSM Thread) : MT28442-4N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28443-4C
- Part Number (1¼" NPSM Thread) : MT28443-4N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28444-4C
- Part Number (1¼" NPSM Thread) : MT28444-4N
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28442-6C
- Part Number (1¼" NPSM Thread) : MT28442-6N
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28443-6C
- Part Number (1¼" NPSM Thread) : MT28443-6N
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28444-6C
- Part Number (1¼" NPSM Thread) : MT28444-6N