International Standards

All Elcometer products are designed to comply with National and International Standards.  We have a team of experts working with Standards bodies around the world, ensuring we have products fit for purpose, exceeding the demands of our customers.

We continuously review our products against current and new Standards and for the most up to date list, visit our online catalogue which provides the latest information on all new, current and superseded Standards which our products can be used in accordance with.


Below is a list of National and International Standards which are relevant to the products supplied by Elcometer. Additional information on these standards can be obtained by visiting the appropriate authority.


The latest National and International Standards have been identified. Those in Orange are current and those in Grey have been superseded but are still recognised in some industries.


A range of National and International Standards are listed below, please click on the relevant standard to go directly to the list.

 

 

AATCC CP  GM
 ACI DIN IMO 
ANSI EC ISO SANS  
AS ECCA JIS
 
AS/NZS EN MIL  
ASME FEDERAL NACE SS  
ASTM FIAT NBN  SSPC  
BS FORD NEMA TAPPI  
 CONCRETE SOCIETY FTMS NF   UNE   
 

 

 

 

Standard Standard Title Reference Elcometer Model
       
AATCC      
AATCC Method 8 Colorfastness to Crocking - Crockmeter Method Washability & Abrasion 5750
       
Return to the top      
       
ACI      
ACI 318 Building Code Requirements for Structural Concrete and Commentary Concrete & Metal Detection 331
       
Return to the top      
       
ANSI      
ANSI INCITS 322 Information Technology - Card Durability Test Methods Washability & Abrasion 5135, 5155
ANSI/AWWA C 203 AWWA Standard for Coal - Tar Protective Coatings and Linings
for Steel Water Pipelines - Enamel and Tape - Hot Applied
Pinhole & Porosity 280
ANSI/AWWA C 213 AWWA C213-07 Fusion-Bonded Epoxy Coating for the Interior
and Exterior of Steel Water Pipelines
Pinhole & Porosity 266
ANSI/AWWA C 213 AWWA C213-07 Fusion-Bonded Epoxy Coating for the Interior
and Exterior of Steel Water Pipelines
Pinhole & Porosity 236
ANSI/AWWA C 214 AWWA C214-14 Tape Coatings for Steel Water Pipe Pinhole & Porosity 280
       
Return to the top      
       
AS      
AS 1580.108.2 Paints and related materials: Methods of test -
Dry Film Thickness-paint inspection gauge
Dry Film Thickness 141
AS 1580.108.2  Paints and related materials: Methods of test -
Dry Film Thickness-paint inspection gauge
Dry Film Thickness 121/4
AS 1580.408.4 Paints and related materials: Methods of test - Adhesion (cross-cut) Adhesion Testers 107, 1542
AS 1580.408.4 Paints and related materials: Methods of test - Adhesion (cross-cut) Dry Film Thickness 121/4
AS 1580.408.5 Paints and related materials: Methods of test - Adhesion (Pull-off test) Adhesion Testers 106
AS 2331.1.3 Methods of test for metallic and related coatings Method:
Local thickness tests (Magnetic method)
Dry Film Thickness 101, 211
AS 2331.1.4

Methods of test for metallic and related coatings Method:
Local thickness tests (Magnetic induction and eddy current methods)

Dry Film Thickness 415
AS 2331.1.4 Methods of test for metallic and related coatings Method:
Local thickness tests (Magnetic induction and eddy current methods)
Dry Film Thickness 355, 456
AS 3894.1 Site testing of protective coatings Method: Non-conductive coatings -
Continuity testing - High voltage (brush) method
Pinhole & Porosity 266
AS 3894.1 Site testing of protective coatings Method: Non-conductive coatings -
Continuity testing - High voltage (brush) method
Pinhole & Porosity 236
AS 3894.1 Site testing of protective coatings Method: Non-conductive coatings -
Continuity testing - High voltage (brush) method
Pinhole & Porosity 280
AS 3894.2 Site testing of protective coatings Method 2: Non-conductive coatings -
Continuity testing (Wet sponge method)
Pinhole & Porosity 270
AS 3894.3-A Site testing of protective coatings Method 3: Determination of
dry film thickness (Magnetic Instrument Method)
Dry Film Thickness 211
AS 3894.3-B Site testing of protective coatings method 3: Determination of
dry film thickness (Magnetic Induction and Eddy Current Methods)
Dry Film Thickness 355, 456
AS 3894.4 Site testing of protective coatings method 4: Assessment of degree of cure Hardness & Scratch 3101/2
AS 3894.4 Site testing of protective coatings method 4: Assessment of degree of cure Hardness & Scratch 3092
AS 3894.5 Site testing of protective coatings method 5: Determination of surface profile

Surface Preparation

125
AS 3894.5 Site testing of protective coatings method 5: Determination of surface profile

Surface Preparation

127
AS 3894.5 Site testing of protective coatings method 5: Determination of surface profile

Surface Preparation

129
AS 3894.6-A Site testing of protective coatings method 6: Determination of
residual contaminants - For detection of chlorides 

Surface Preparation

138
AS 3894.6-A Site testing of protective coatings method 6: Determination of
residual contaminants - For detection of chlorides 

Surface Preparation

138/2
AS 3894.6-C Site testing of protective coatings method 6: Determination of
residual contaminants - For detection of surface dust

Surface Preparation

142
AS 3894.6-D Site testing of protective coatings method 6: Determination of
residual contaminants - For detection of soluble salts of iron 

Surface Preparation

138/2
AS 3894.9 Site testing of protective coatings method 9: Determination of adhesion Adhesion Testers 107, 1542
AS 3894.9 Site testing of protective coatings method 9: Determination of adhesion Dry Film Thickness 121/4
       
Return to the top      
       
AS/NZS      
AS/NZS 1580.107.3 Paints and related materials: Methods of test - Determination of wet film thickness by gauge Wet Film & Powder Thickness 112, 115, 3236, 3238
AS/NZS 1580.107.3 Paints and related materials: Methods of test - Determination of wet film thickness by gauge Wet Film & Powder Thickness 3230
AS/NZS 1580.108.1 Paints and related materials: Methods of test - Determination of
dry film thickness on metallic substrates (Non-destructive methods)
Dry Film Thickness 311
AS/NZS 1580.108.1 Paints and related materials: Methods of test - Determination of
dry film thickness on metallic substrates (Non-destructive methods)
Dry Film Thickness 211
AS/NZS 1580.108.1 Paints and related materials: Methods of test - Determination of
dry film thickness on metallic substrates (Non-destructive methods)
Dry Film Thickness 415
AS/NZS 1580.108.1 Paints and related materials: Methods of test - Determination of
dry film thickness on metallic substrates (Non-destructive methods)
Dry Film Thickness 355, 456
AS/NZS 1580.204.1 Paints and related materials: Methods of test Method - Fineness of grind Fineness of Grind 2020, 2041, 2050
AS/NZS 1580.213.1 Paints and related materials: Methods of test - Relative dry hiding power Film Application Leneta
AS/NZS 1580.214.1 Paints and related materials: Methods of test - Consistency
(Stormer viscometer)
Rotational & Krebs Viscosity 2250
AS/NZS 1580.214.2 Paints and related materials: Methods of test - Consistency - Flow cup Viscosity Cups 2354 cup 4 only
AS/NZS 1580.214.5 Paints and related materials: Methods of test - Consistency -
Rotational viscometer
Rotational & Krebs Viscosity 2300
AS/NZS 1580.402.1 Paints and related materials: Methods of test - Bend test Elasticity & Deformation 1500, 1506
AS/NZS 1580.403.1 Paints and related materials: Methods of test - Scratch resistance Hardness & Scratch 3000 Motorised
3000 Manual
AS/NZS 1580.403.2 Methods of test for paints and related materials: Abrasion resistance -
Taber abraser
Washability & Abrasion 5135, 5155
AS/NZS 1580.406.1 Cots for day nursery, hospital and institutional use - Safety requirements Elasticity & Deformation 1615
AS/NZS 1580.408.5 Methods of test for paints and related materials - Adhesion (Pull-off test) Adhesion Testers 106
AS/NZS 1580.408.5 Methods of test for paints and related materials - Adhesion (Pull-off test) Adhesion Testers 506
AS/NZS 1580.408.5 Methods of test for paints and related materials - Adhesion (Pull-off test) Adhesion Testers 510
AS/NZS 1580.459.1 Paints and related materials: Methods of test - Resistance to washing Washability & Abrasion 1720
AS/NZS 1580.601.1 Paints and related materials: Methods of test - Colour - Visual comparison Appearance Measurement 6300
AS/NZS 1580.601.3  
Paints and related materials: Methods of test - Colour - Methods of colour measurement
Appearance Measurement 6085
AS/NZS 1580.602.2  
Paints and related materials: Methods of test -  Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85°
Appearance Measurement 480
AS/NZS 4266.2  
Constituted wood-based panels - Methods of test - Decorative overlaid panels
Washability & Abrasion 5135, 5155
       
Return to the top      
       
ASME      
ASME B46  
Surface Texture (Surface Roughness, Waviness, and Lay)

Surface Preparation

7061, 7062
       
Return to the top      
       
ASTM      
ASTM B 244  
Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
Dry Film Thickness 355
ASTM B 499  
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Dry Film Thickness 101
ASTM B 499  
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Dry Film Thickness 211
ASTM B 499  
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Dry Film Thickness 415
ASTM B 499  
Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Dry Film Thickness 355, 456
ASTM B 648  
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
Hardness & Scratch 3101
ASTM C 1353  
Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
Washability & Abrasion 5135, 5155
ASTM C 1583  
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
Adhesion Testers 510
ASTM C 217  
Standard Test Method for Weather Resistance of Slate
Washability & Abrasion 5135, 5155
ASTM C 241  
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
Washability & Abrasion 5135, 5155
ASTM C 501  
Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
Washability & Abrasion 5135, 5155
ASTM C 523  
Method of Test for Light Reflectance of Acoustical Materials by the Integrating Sphere Reflectometer (Withdrawn 1988)
Appearance Measurement 480
ASTM C 536  
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
Pinhole & Porosity 266
ASTM C 536  
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
Pinhole & Porosity 236
ASTM C 537  
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
Pinhole & Porosity 266
ASTM C 537  
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
Pinhole & Porosity 236
ASTM C 584  
Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
Appearance Measurement 480
ASTM C 609  
Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
Appearance Measurement 6085
ASTM C 805  
Standard Test Method for Rebound Number of Hardened Concrete
Concrete & Metal Detection 181, 182
ASTM C 876-91  
Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
Concrete & Metal Detection 331
ASTM D 1044  
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
Washability & Abrasion 5135, 5155
ASTM D 1084-B  
Standard Test Methods for Viscosity of Adhesives
Rotational & Krebs Viscosity 2300
ASTM D 1084-C  
Standard Test Methods for Viscosity of Adhesives
Rotational & Krebs Viscosity 2250
ASTM D 1084-D  
Standard Test Methods for Viscosity of Adhesives
Viscosity Cups 2210
ASTM D 1131  
Standard Test Methods of Testing Rosin Oils (Withdrawn 2003)
Rotational & Krebs Viscosity 2250
ASTM D 1186  
Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
Dry Film Thickness 415
ASTM D 1186-B  
Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) - Electronic Gauges
Dry Film Thickness 355, 456
ASTM D 1200  
Standard Test Method for Viscosity by Ford Viscosity Cup
Viscosity Cups 2351, 2435
ASTM D 1210  
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gauge
Fineness of Grind 2020, 2041, 2050
ASTM D 1212-A
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings - Wet Film Thickness Gage
Wet Film & Powder Thickness 3230
ASTM D 1212-B  
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings - mPfund Gauge
Wet Film & Powder Thickness 3233
ASTM D 1316  
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
Fineness of Grind 2070
ASTM D 1400  
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006)
Dry Film Thickness 355, 456
ASTM D 1400  
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006)
Dry Film Thickness 415
ASTM D 1455  
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
Appearance Measurement 480
ASTM D 1475  
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Density 1800
ASTM D 1640-03
Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
Film Application 3505 
ASTM D 1653  
Standard Test Methods for Water Vapor Transmission of Organic Coating Films
Drying Time & Permeability 5100
ASTM D 1729  
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
Appearance Measurement 6300
ASTM D 1737  
Method of Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn 1987)
Elasticity & Deformation 1500, 1506
ASTM D 1792 - 06  
Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
Washability & Abrasion 1720
ASTM D 2196  
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Rotational & Krebs Viscosity 2300
ASTM D 2198 - 02  
Test Method for Stain Removal from Multicolor Lacquers
Washability & Abrasion 1720
ASTM D 2197  
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
Washability & Abrasion 5750
ASTM D 2200  
Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

Surface Preparation

128
ASTM D 2240  
Standard Test Method for Rubber Property - Durometer Hardness
Hardness & Scratch 3120
ASTM D 2244  
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
Appearance Measurement 6085
ASTM D 2457  
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
Appearance Measurement 480, 408
ASTM D 2486  
Standard Test Methods for Scrub Resistance of Wall Paints
Film Application Leneta
ASTM D 2486  
Standard Test Methods for Scrub Resistance of Wall Paints
Washability & Abrasion 1720, 1720 Tool 2
ASTM D 2583  
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
Hardness & Scratch 3101
ASTM D 2794  
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
Elasticity & Deformation 1615
ASTM D 2805  
Standard Test Method for Hiding Power of Paints by Reflectometry
Film Application Leneta
ASTM D 3206 - 08  
Standard Test Method for Soil Resistance of Floor Polishes
Washability & Abrasion 1720
ASTM D 3359-B  
Standard Test Methods for Measuring Adhesion by Tape Test
Adhesion Testers 107, 1542
ASTM D 3359-B  
Standard Test Methods for Measuring Adhesion by Tape Test
Dry Film Thickness 121/4 Adhesion
ASTM D 3363  
Standard Test Method for Film Hardness by Pencil Test
Hardness & Scratch 501, 3080, 3086
ASTM D 3389  
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
Washability & Abrasion 5135, 5155
ASTM D 344  
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
Film Application Leneta
ASTM D 3450  
Standard Test Method for Washability Properties of Interior Architectural Coatings
Washability & Abrasion 1720, 1720 Tool 4
ASTM D 3884  
Standard Test Method for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
Washability & Abrasion 5135, 5155
ASTM D 4039  
Standard Test Method for Reflection Haze of High-Gloss Surfaces
Appearance Measurement 480
ASTM D 4060  
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
Washability & Abrasion 5135, 5155
ASTM D 4086  
Standard Practice for Visual Evaluation of Metamerism
Appearance Measurement 6300
ASTM D 4138-A  
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
Dry Film Thickness 141
ASTM D 4138-A  
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
Dry Film Thickness 121/4
ASTM D 4147  
Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
Film Application 4360, 4361
ASTM D 4212  
Standard Test Method for Viscosity by Dip-Type Viscosity Cups
Viscosity Cups 2310
ASTM D 4212  
Standard Test Method for Viscosity by Dip-Type Viscosity Cups
Viscosity Cups 2210
ASTM D 4213  
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
Washability & Abrasion 1720, 1720 Tool 5
ASTM D 4213:92  
Spongeability and Washability Tester
Washability & Abrasion 1720 Tool 3
 ASTM D 2198 - 02  Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests

 

Hardness & Scratch

 

3045
ASTM D 4400  
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
Film Application 4270
ASTM D 4414-A  
Standard Practice for Measurement of Wet Film Thickness by Notch Gauges
Wet Film & Powder Thickness 112, 115, 3236, 3238
ASTM D 4417-A  
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

Surface Preparation

125
ASTM D 4417-A  
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

Surface Preparation

127
ASTM D 4417-B  
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

Surface Preparation

123, 224
ASTM D 4417-C  
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

Surface Preparation

122, 124
ASTM D 4449  
Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
Appearance Measurement 480
ASTM D 4488  
Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls (Withdrawn 2009)
Washability & Abrasion 1720
ASTM D 4541  
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Adhesion Testers 108, 508
ASTM D 4541  
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Adhesion Testers 510
ASTM D 4541  
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Adhesion Testers 106
ASTM D 4541  
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Adhesion Testers 506
ASTM D 4787  
Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
Pinhole & Porosity 266
ASTM D 4787  
Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
Pinhole & Porosity 236
ASTM D 4787  
Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
Pinhole & Porosity 280
ASTM D 4828  
Standard Test Methods for Practical Washability of Organic Coatings
Washability & Abrasion 1720, 1720 Tool 3
ASTM D 4940  
Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives

Surface Preparation

138 Abrasive Kit
ASTM D 5125  
Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
Viscosity Cups 2353, 2437
ASTM D 5150  
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
Film Application Leneta
ASTM D 5162  
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
Pinhole & Porosity 280
ASTM D 5162-A  
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
Pinhole & Porosity 270
ASTM D 5162-B  
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
Pinhole & Porosity 266
ASTM D 5162-B  
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
Pinhole & Porosity 236
ASTM D 5178  
Standard Test Method for Mar Resistance of Organic Coatings
Washability & Abrasion 5750
ASTM D 522-A  
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
Elasticity & Deformation 1510
ASTM D 522-B  
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
Elasticity & Deformation 1500, 1506
ASTM D 523  
Standard Test Method for Specular Gloss
Appearance Measurement 480, 408
ASTM D 5420  
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
Elasticity & Deformation 1615
ASTM D 562  
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
Rotational & Krebs Viscosity 2250
ASTM D 5767  
Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces
Appearance Measurement 480, 408
ASTM D 6037  
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
Washability & Abrasion 5135, 5155
ASTM D 6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage Dry Film Thickness 500
ASTM D 6279  
Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
Washability & Abrasion 5750
ASTM D 6279 - 03 (2007)  
Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
Washability & Abrasion 1720
ASTM D 6441  
Standard Test Methods for Measuring the Hiding Power of Powder Coatings
Film Application Leneta
ASTM D 7091  
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
Dry Film Thickness 355, 456, 456IPC
ASTM D 7091  
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
Dry Film Thickness 415
ASTM D 7127  
Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

Surface Preparation

7061, 7062
ASTM D 7234  
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
Adhesion Testers 106/6
ASTM D 7234  
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
Adhesion Testers 506
ASTM D 7234-12  
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
Adhesion Testers 510
ASTM D 7255  
Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
Washability & Abrasion 5135, 5155
ASTM D 7378-A  
Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
Wet Film & Powder Thickness 155
ASTM D 7378-C  
Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
Wet Film & Powder Thickness 550
ASTM D 823-C  
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
Film Application 4340
ASTM D 823-E  
Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
Film Application

3505, 3520, 3525,
3530, 3540, 3550,
3560, 3570, 3580

ASTM D 856  
Method of Sampling and Testing Pine Tars and Pine-Tar Oils (Withdrawn 1991)
Rotational & Krebs Viscosity 2250
ASTM D 891-B  
Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
Density 1800
ASTM E 1164  
Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
Appearance Measurement 6085
ASTM E 2387  
Standard Practice for Goniometric Optical Scatter Measurements
Appearance Measurement 480
ASTM E 2501  
Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
Pinhole & Porosity 260
ASTM E 308  
Standard Practice for Computing the Colors of Objects by Using the CIE System
Appearance Measurement 6085
ASTM E 313  
Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
Appearance Measurement 6085
ASTM E 337-B  
Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
Climatic Conditions 116
ASTM E 376  
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
Dry Film Thickness 311
ASTM E 376  
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
Dry Film Thickness 355, 456
ASTM E 376  
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
Dry Film Thickness 415
ASTM E 430  
Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
Appearance Measurement 480, 408
ASTM E 70  
Standard Test Method for pH of Aqueous Solutions With the Glass Electrode

Surface Preparation

148
ASTM E 797  
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
Material Thickness 204 - 208
ASTM E 797   
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
Ultrasonic NDT MTG2, MTG4, MTG6, MTG8
ASTM E 797  
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
Material Thickness 204, 304
ASTM E 96  
Standard Test Methods for Water Vapor Transmission of Materials
Drying Time & Permeability 5100
ASTM F 1319  
Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
Washability & Abrasion 5750
ASTM F 1319  
Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
Washability & Abrasion 1720, 1720 Tool 8
ASTM F 1478  
Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
Washability & Abrasion 5135, 5155
ASTM F 1978  
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
Washability & Abrasion 5135, 5155
ASTM F 362  
Standard Test Method for Determining the Erasability of Inked Ribbons
Washability & Abrasion 5135, 5155
ASTM F 510  
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
Washability & Abrasion 5135, 5155
ASTM G 12  
Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
Dry Film Thickness 101
ASTM G 12  
Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
Dry Film Thickness 211
ASTM G 12  
Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
Dry Film Thickness 355, 456
ASTM G 6  
Standard Test Method for Abrasion Resistance of Pipeline Coatings
Pinhole & Porosity 270
ASTM G 62-A  
Standard Test Methods for Holiday Detection in Pipeline Coatings - holidays such as pinholes and voids in thin-film coatings from 0.0254 to 0.254 mm (1 to 10 mils)
Pinhole & Porosity 270
ASTM G 62-B  
Standard Test Methods for Holiday Detection in Pipeline Coatings (detect thin spots in the coating)
Pinhole & Porosity 266
ASTM G 62-B  
Standard Test Methods for Holiday Detection in Pipeline Coatings (detect thin spots in the coating)
Pinhole & Porosity 236
       
Return to the top      
       
BS      
BS 1344-11  
Methods of testing vitreous enamel finishes: High voltage test for articles for use under highly corrosive conditions
Pinhole & Porosity 266
BS 1344-11  
Methods of testing vitreous enamel finishes: High voltage test for articles for use under highly corrosive conditions
Pinhole & Porosity 236
BS 1881:201  
Testing concrete: Guide to the use of non-destructive methods of test for hardened concrete
Concrete & Metal Detection 331
BS 1881:202  
Testing concrete: Recommendations for surface hardness testing by rebound hammer
Concrete & Metal Detection 181, 182
BS 1881:204  
Testing concrete: Recommendations on the use of electromagnetic covermeters
Concrete & Metal Detection 331
BS 1881:207  
Testing concrete: Recommendations for the assessment of concrete strength by near-to-surface tests
Adhesion Testers 106/6, 506
BS 1881:207  
Testing concrete: Recommendations for the assessment of concrete strength by near-to-surface tests
Adhesion Testers 510
BS 2842  
Specification for whirling hygrometer
Climatic Conditions 116
BS 3900-A6:1971  
Methods of test for paints: Tests on liquid paints (excluding chemical tests) - Determination of flow time by use of flow cups.
Viscosity Cups 2354
BS 3900-A7-2  
Methods of test for paints: Tests on liquid paints (excluding chemical tests) - Determination of the viscosity of paint at a high rate of shear
Rotational & Krebs Viscosity 2300
BS 3900-C5-5B  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 141
BS 3900-C5-5B  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 121/4
BS 3900-C5-6A  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 211
BS 3900-C5-6A  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 355, 456
BS 3900-C5-6A  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 415
BS 3900-C5-6B  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 355, 456
BS 3900-C5-6B  
Paints and varnishes: Determination of film thickness
Dry Film Thickness 415
BS 3900-C5-7A  
Methods of test for paints: Tests associated with paint film formation - Determination of film thickness
Wet Film & Powder Thickness 3230
BS 3900-C5-7B  
Methods of test for paints: Tests associated with paint film formation - Determination of film thickness
Wet Film & Powder Thickness 112, 115, 3236, 3238
BS 3900-C5-7B  
Methods of test for paints: Tests associated with paint film formation - Determination of film thickness
Wet Film & Powder Thickness 154
BS 3900-D4  
Methods of test for paints: Optical tests on paint film -  Comparison of contrast ratio (hiding power) of paints of the same type and colour
Film Application Leneta
BS 3900-D5  
Methods of test for paints: Optical tests on paint films -  Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85°
Appearance Measurement 480
BS 3900-E1  
Methods of test for paints - Bend test (cylindrical mandrel)
Elasticity & Deformation 1500

BS 3900 E5
Methods of test for paints. Pendulum damping test

 

Hardness & Scratch

 

3045
BS 3900-E11  
Paints and varnishes - Bend test (conical mandrel)
Elasticity & Deformation 1510
BS 3900-E13  
Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
Elasticity & Deformation 1615
BS 3900-E19  
Determination of film hardness by pencil test
Hardness & Scratch 501, 3080, 3086
BS 3900-E2  
Methods of test for paints: Methods of test for paints - Scratch test
Hardness & Scratch 3000 Motorised
3000 Manual
BS 3900-E4  
Methods of test for paints: Mechanical tests on paint films - Cupping test
Elasticity & Deformation 1620
BS 3900-E6  
Methods of test for paints: Cross-cut test
Adhesion Testers 107, 1542
BS 3900-E6  
Methods of test for paints: Cross-cut test
Dry Film Thickness 121/4 Adhesion
BS 3900-E9  
Paints and varnishes: Buchholz indentation test
Hardness & Scratch 3095
BS 5411-11  
Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method)
Dry Film Thickness 101
BS 5411-11  
Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method)
Dry Film Thickness 355, 456
BS 5411-11  
Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals (Magnetic Method)
Dry Film Thickness 211
BS 5411-11  
Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain Enamel Coatings on Magnetic Basis Metals: Magnetic Method
Dry Film Thickness 415
BS 5411-3  
Methods of Test for Metallic and related coatings Part 3: Eddy Current Method for Measurement of Coating Thickness of Non-conductive coatings on non-magnetic basis metals 
Dry Film Thickness 355, 456
BS 5411-3  
Methods of Test for Metallic and related coatings Part 3: Eddy Current Method for Measurement of Coating Thickness of Non-conductive coatings on non-magnetic basis metals 
Dry Film Thickness 415
BS 5599  
Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
Dry Film Thickness 415
BS 5599  
Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
Dry Film Thickness 355, 456
BS 5599  
Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
Hardness & Scratch 5135, 5155
BS 6496:1984  
Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
Elasticity & Deformation 1615
BS 7079-B4  
Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted
Climatic Conditions 319
BS 7079-B4  
Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted
Climatic Conditions 320
BS 7079-B4  
Preparation of steel substrates before application of paints and related products Group B: Methods for the assessment of surface cleanliness - Part B4: Guide to the estimation of the probability of condensation on a surface to be painted
Climatic Conditions 309
BS 7079-C5  
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile (AMD 15516)

Surface Preparation

122
BS 7442-3.2  
Rubber or plastics covered rollers. Method of test. Determination of Shore hardness
Hardness & Scratch 3120
BS 7479  
Method for salt spray corrosion tests in artificial atmospheres
Hardness & Scratch 1537
BS 7793-2  
Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
Pinhole & Porosity 270
BS 8110  
Structural use of concrete. Code of practice for design and construction
Concrete & Metal Detection 331
BS 8493  
Light reflectance value (LRV) of a surface. Method of test
Appearance Measurement 6085
BS 950-1  
Specification for artificial daylight for the assessment of colour. Illuminant for colour matching and colour appraisal
Appearance Measurement 6300
       
Return to the top      
       
Concrete Society      
Concrete Society
Technical Report 60
 
Electrochemical tests for reinforcement corrosion
Concrete & Metal Detection 331
       
Return to the top      
       
CP      
CP 110  
Code of practice for the structural use of concrete. Design, materials and workmanship
Concrete & Metal Detection 331
       
Return to the top      
       
DIN      
DIN 1045  
Extension of Reinforced Concrete Design Modules with Design
Concrete & Metal Detection 331
DIN 1048  
Testing of Drycrete Moisture Stop
Concrete & Metal Detection 181, 182
DIN 1048-2  
Testing Concrete; Testing of Hardened Concrete 
Adhesion Testers 106/6, 506
DIN 1048-2  
Testing Concrete; Testing of Hardened Concrete 
Adhesion Testers 510
DIN 4768  
Comparison of Surface Roughness Values

Surface Preparation

7061, 7062
DIN 5033-2  
Colorimetry; Standard colorimetric Systems 
Appearance Measurement 6085
DIN 5033-3  
Colorimetry; colorimetric measures
Appearance Measurement 6085
DIN 5033-4  
Colorimetry; spectrophotometric method
Appearance Measurement 6085
DIN 5033-7  
Measuring conditions for object colours
Appearance Measurement 6085

DIN 50981

 

Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material
Dry Film Thickness 211

DIN 50981

 

Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material
Dry Film Thickness 355, 456

DIN 50981

 

Measurement of coating thickness; magnetic methods for measurement of thickness of non-ferromagnetic coatings on ferromagnetic material
Dry Film Thickness 415

DIN 50984

 

Measurement of coating thickness; eddy current method for measurement of thickness of electrical non-conductive coatings on non-ferromagnetic basic metals
Dry Film Thickness 355, 456

DIN 50984

 

Measurement of coating thickness; eddy current method for measurement of thickness of electrical non-conductive coatings on non-ferromagnetic basic metals
Dry Film Thickness 415

DIN 50986

 

Paints and varnishes - Determination of dry-film thickness using the wedge-cut method (scribe and drill method)

 

Dry Film Thickness 121/4

DIN 50896

 

Metal Twist Drill Bit

 

Dry Film Thickness 141

DIN 52347

 

Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light

 

Washability & Abrasion 5135, 5155

DIN 53109

 

Testing of Paper and Board - Determination of abrasion by the Abrasion Wheel Method

 

Washability & Abrasion 5135, 5155

DIN 53152

 

Paints and varnishes; bend test on coatings; method using cylindrical mandrel
Elasticity & Deformation 1500

DIN 53153

 

Testing of Paints, Varnishes and Similar Coating Materials; Buchholz Indentation Test on Paint Coatings and Similar Coatings
Hardness & Scratch 3095

DIN 53156

 

Testing of paints, varnishes and similar coating materials; cupping test - An paint coatings and similar coatings with optical evaluation
Elasticity & Deformation 1620

 DIN 53157

Paints, Varnishes and Similar Coating Materials; Assessment of the Mechanical Damping Behaviour of Coatings Using the Koenig Pendulum Apparatus (Pendulum Damping Test)

 

Hardness & Scratch

 

3045

DIN 53162-2

 

Testing paints, varnishes and similar products

 

Film Application Leneta

DIN 53167

 

Paints, varnishes and similar coating materials; salt spray test on coatings
Hardness & Scratch 1538

DIN 53203

 

Testing of paints and other pigment vehicle systems; estimation of the coarseness (respectively fineness) of dispersion by the grindometer
Fineness of Grind 2020, 2041, 2050

DIN 53211

 

Paints, Varnishes and Similar Coating Materials Determination of Flow Time using the DIN Flow Cup 
Viscosity Cups 2350, 2434 cup 4 only

DIN 53217-2

 

Determination of density of paints, varnishes and similar coating materials by the pyknometer method
Density 1800

DIN 53232

 

Testing of paints, varnishes and similar coating materials - Measurement of the adhesion of paint coatings and similar coatings according to the pull-off method
Elasticity & Deformation 1620

DIN 53505

 

Testing of rubber - Shore A and Shore D hardness test

 

Hardness & Scratch 3120

DIN 53754

 

Testing of plastics; determination of abrasion, abrasive disk method

 

Washability & Abrasion 5135, 5155

DIN 53778-2:1983

 

Emulsion paints for interior use; evaluation of cleanability and of wash and scrub resistance of coatings

 

Washability & Abrasion 1720, 1720 Tool 1

DIN 53799

 

Decorative laminated sheets on basis of aminoplastic resins; test method
Hardness & Scratch 3000 Motorised
3000 Manual

DIN 53799

 

Decorative laminated sheets on basis of aminoplastic resins; test method
Washability & Abrasion 5135, 5155

DIN 55670

 

Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage

 

Pinhole & Porosity 266

DIN 55670

 

Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage

 

Pinhole & Porosity 236

DIN 6174

 

Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space

 

Appearance Measurement 6085

DIN 67530

 

Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics

 

Appearance Measurement 480, 408
DIN 68861-2  
Furniture surfaces - Behavior at abrasion
Washability & Abrasion 5135, 5155
       
Return to the top      
       
EC      
EC 2  
Design of concrete structures
Concrete & Metal Detection 331
       
Return to the top      
       
ECCA       
ECCA T1  
Coating Thickness
Dry Film Thickness 415
ECCA T1  
Coating Thickness
Dry Film Thickness 355, 456
ECCA T11  
M.E.K./Solvent Rubbing Test 
Washability & Abrasion 1720, 1720 Tool 9B
ECCA T12  
Scratch Resistence 
Hardness & Scratch 3000 Motorised
3000 Manual
ECCA T16  
Abrasive Resistense
Washability & Abrasion 5135, 5155
ECCA T2  
Specular Gloss 
Appearance Measurement 480
ECCA T4  
Pencil Hardness
Hardness & Scratch 501, 3080, 3086
ECCA T5  
Resistence to Rapid Deformation 
Elasticity & Deformation 1615
ECCA T6  
Adhesion after Indentation 
Adhesion Testers 107, 1542
ECCA T6  
Adhesion after Indentation 
Dry Film Thickness 121/4 Adhesion
ECCA T6  
Adhesion after Indentation 
Elasticity & Deformation 1620
       
Return to the top      
       
EN      
EN 10049  
Measurement of roughness average - Ra and peak count RPc on metallic flat products

Surface Preparation

7061, 7062
EN 1015  
Methods of test for mortar for masonry -  Determination of flexural and compressive strength of hardened mortar
Adhesion Testers 510
EN 12206-1:2004  
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder
Elasticity & Deformation 1615
EN 12373-11  
Aluminium and aluminium alloys - Anodizing - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and 85°
Appearance Measurement 480
EN 12373-12  
Aluminium and aluminium alloys -Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
Appearance Measurement 6085
EN 12504-2  
Testing concrete in structures: Non-destructive testing - Determination of rebound number
Concrete & Metal Detection 181, 182
EN 12636  
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
Adhesion Testers 106/6, 506
EN 12636  
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
Adhesion Testers 510
EN 12956  
Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability
Washability & Abrasion 1720
EN 13144  
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
Adhesion Testers 106, 506
EN 13144  
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
Adhesion Testers 510
EN 13329  
Laminate floor coverings - Specifications, requirements and test methods
Washability & Abrasion 5135, 5155
EN 13523-1  
Coil coated metals: Test methods - Film thickness
Dry Film Thickness 415
EN 13523-1  
Coil coated metals: Test methods - Film thickness
Dry Film Thickness 355, 456
EN 13523-11  
Coil coated metals: Test methods - Resistance to solvents (rubbing test)
Washability & Abrasion 1720, 1720 Tool 9B
EN 13523-12  
Coil coated metals: Test methods - Resistance to scratching
Hardness & Scratch 3000 Motorised
3000 Manual
EN 13523-15  
Coil coated metal: Test methods - Metamerism
Appearance Measurement 6085
EN 13523-16  
Coil coated metals: Test methods - Resistance to abrasion
Washability & Abrasion 5135, 5155
EN 13523-2  
Coil coated metals: Test methods - Gloss
Appearance Measurement 480
EN 13523-4  
Coil coated metals: Test methods - Pencil hardness
Hardness & Scratch 501, 3080, 3086
EN 13523-5   
Coil coated metals: Test methods - Pencil hardness
Elasticity & Deformation 1615
EN 13523-6  
Coil coated metals: Test methods - Adhesion after indentation (cupping test)
Adhesion Testers 107, 1542
EN 13523-6  
Coil coated metals: Test methods - Adhesion after indentation (cupping test)
Dry Film Thickness 121/4 Adhesion
EN 13523-6  
Coil coated metals: Test methods - Adhesion after indentation (cupping test)
Elasticity & Deformation 1620
EN 13696  
Wood flooring: Test methods to determine elasticity and resistance to wear and impact resistance
Washability & Abrasion 5135, 5155
EN 14127  
Non-destructive testing: Ultrasonic thickness measurement
Ultrasonic NDT MTG2, MTG4, MTG6, MTG8
EN 14127  
Non-destructive testing: Ultrasonic thickness measurement
Ultrasonic NDT PTG6, PTG8
EN 14127  
Non-destructive testing: Ultrasonic thickness measurement
Material Thickness 204, 304
EN 14127  
Non-destructive testing: Ultrasonic thickness measurement
Material Thickness 307
EN 14323  
Wood-based panels: Melamine faced boards for interior uses - Test methods
Washability & Abrasion 5135, 5155
EN 14327  
Leather, physical and mechanical tests: Determination of abrasion resistance of automotive leather
Washability & Abrasion 5135, 5155
EN 14354  
Wood-based panels: Wood veneer floor covering
Washability & Abrasion 5135, 5155
EN 14430  
Vitreous and porcelain enamels - High voltage test
Pinhole & Porosity 266
EN 14430  
Vitreous and porcelain enamels - High voltage test
Pinhole & Porosity 236
EN 14431  
Vitreous and porcelain enamels: Characteristics of the enamel coatings applied to steel panels intended for architecture
Washability & Abrasion 5135, 5155
EN 14688  
Sanitary appliances: Wash basins - Functional requirements and test methods
Washability & Abrasion 5135, 5155
EN 14864  
Vitreous and porcelain enamels: Enamel coatings applied to steel for writing surfaces - Specification
Washability & Abrasion 5135, 5155
EN 1504-2  
Products and systems for the protection and repair of concrete structures: Definitions, requirements, quality control and evaluation of conformity - Surface protection systems for concrete
Washability & Abrasion 5135, 5155
EN 15317   
Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Material Thickness 204 - 208
EN 15317   
Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Ultrasonic NDT MTG2, MTG4, MTG6, MTG8
EN 15317  
Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Ultrasonic NDT PTG6, PTG8
EN 15317  
Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Material Thickness 204, 304
EN 15317  
Non-destructive testing: Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
Material Thickness 307
EN 1542  
Products and systems for the protection and repair of concrete structures: Test methods - Measurement of bond strength by pull-off
Adhesion Testers 506, 106/6
EN 1542  
Products and systems for the protection and repair of concrete structures: Test methods - Measurement of bond strength by pull-off
Adhesion Testers 510
EN 21524  
Paints and Varnishes - Determination of Fineness of Grind 
Fineness of Grind 2020, 2041, 2050
EN 22063  
Metallic and other inorganic coatings: Thermal spraying. Zinc, aluminium and their alloys
Hardness & Scratch 1537
EN 233/C3.2-A  
Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings
Washability & Abrasion 1720, 1720 Tool ST1
EN 233/C3.2-B  
Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings
Washability & Abrasion 1720, 1720 Tool ST2
EN 233/C3.2-C  
Wallcoverings in roll form: Specification for finished wallpapers, wall vinyls and plastics wall coverings
Washability & Abrasion 1720, 1720 Tool ST3
EN 24624  
Paints and varnishes - Pull-off test
Adhesion Testers 106
EN 24624  
Paints and varnishes - Pull-off test
Adhesion Testers 506
EN 24624  
Paints and varnishes - Pull-off test
Adhesion Testers 510
EN 438-2  
High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties
Hardness & Scratch 3092
EN 438-2  
High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties
Hardness & Scratch 3025
EN 438-2  
High-pressure decorative laminates (HPL): Sheets based on thermosetting resins (usually called laminates) - Determination of properties
Washability & Abrasion 5135, 5155
EN 60730-1-A  
Automatic electrical controls for household and similar use - General requirements
Washability & Abrasion 1720 Tool 10
EN 660-2  
Resilient floor coverings: Determination of wear resistance - Frick-Taber test
Washability & Abrasion 5135, 5155
       
Return to the top      
       
FEDERAL      
P-D-220D  
Federal Specification: Detergent, General purpose 
Washability & Abrasion 1720
P-R-1760   Washability & Abrasion 1720
P-W-155C  
Federal Specification: Wax, Floor, Water-emulsion
Washability & Abrasion 1720
TT-P-26C(1)  
Federal Specification: Paint, Inferior, white, tints and black, fire retardant 
Washability & Abrasion 1720

TT-P-29K

 

Federal Specification, Paint, Latex 
Washability & Abrasion 1720

TT-P-30E(1)

 

Paint, ALKYD, Odorless, Interior, Flat, White and Tints 
Washability & Abrasion 1720

TT-P-47G

 

Paint, Oil (Nonpenetrating - Flat, Ready-mixed tints and white) (Superseding TT-P-47F) 
Washability & Abrasion 1720

TT-E-505B

 

Federal Specification: Enamel (Odorless, ALKYD, Interior, High Gloss)
Washability & Abrasion 1720

TT-E-506K(1)

 

Federal Specification: Enamel, ALKYD, Gloss, Tints and White 
Washability & Abrasion 1720

TT-E-509C

 

Federal Specification: Ennamel, Odorless, ALKYD, Interior, Semigloss, White and Tints 
Washability & Abrasion 1720

TT-C-535B(2)

 

Federal Specification: Coating, Epoxy, Two Component, for interior use on Metal, Wood, Wallboard, Painted Surfaces concrete and masonry
Washability & Abrasion 1720

TT-C-555B(1)

 

Coating, Textured (For Interior and Exterior Masonry Surfaces) 
Washability & Abrasion 1720
       
Return to the top      
       
FIAT      
Fiat 50411  
Hardness Testers

Hardness & Scratch

3120
       
Return to the top      
       
FORD      
Ford BN108-02  
Resistence to Abrasion - Taber Abraser 
Washability & Abrasion 5135, 5155
       
Return to the top      
       
FTMS      
FTMS 141 4121  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing 
Film Application Leneta
FTMS 141 4183  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Specific Gravity of Solvents and Thinners
Density 1800
FTMS 141 4411.1  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and testing - Fineness of Grind 
Fineness of Grind 2020, 2041, 2050
FTMS 141 4494.1  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Sag Test (Multinotch Blade) 
Film Application 4270
FTMS 141 Method 6141  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Washability
Washability & Abrasion 1720
FTMS 141 Method 6142  
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing - Scrub Resistence 
Washability & Abrasion 1720
FTMS Method 536/6701  
Federal Test Method - Cleaning Efficiency
Washability & Abrasion 1720
       
Return to the top      
       
GM      
GM9515P  
Federal Test Method - Cleaning Efficiency
Washability & Abrasion 5135, 5155
GME 60269  
Test Method for Determinating the Abrasion Resistence of Metallized, Painted, Printed etc - Plastic Parts 
Washability & Abrasion 1720, 1720 Tool 9
       
Return to the top      
       
IMO      

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Climatic Conditions 319

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Climatic Conditions 320

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Dry Film Thickness 355, 456

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Surface Preparation

142

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Surface Preparation

138

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Surface Preparation

128

IMO MSC.215(82)

 

Performance Standard for Protective Coatings for Dedicated seawater Ballast Tanks in all types of ships and double-side spaces of Bulk Carriers 

 

Surface Preparation

125

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Climatic Conditions 319

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Climatic Conditions 320

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Dry Film Thickness 355, 456

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Surface Preparation

142

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Surface Preparation

138

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Surface Preparation

128

IMO MSC.244(83)

 

Adoption of Performance standard for protective coatings for void spaces on bulk carriers and oil tankers 

 

Surface Preparation

125

 

 

   
Return to the top      
       

ISO

 

   

ISO 10074

 

Anodizing of aluminium and its alloys: Specification for hard anodic oxidation coatings on aluminium and its alloys

 

Washability & Abrasion 5135, 5155

ISO 105-X12

 

Textiles: Tests for colour fastness - Colour fastness to rubbing

 

Washability & Abrasion 5750

ISO 105-X12

 

Textiles: Tests for colour fastness - Colour fastness to rubbing

 

Washability & Abrasion 1720, 1720 Tool 8

ISO 11998

 

Paints and varnishes: Determination of wet-scrub resistance and cleanability of coatings

 

Washability & Abrasion 1720, 1720 Tool 6

ISO 13803

 

Paints and varnishes: Determination of haze on paint films at 20 degrees

 

Appearance Measurement 480

ISO 1461

 

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods

 

Dry Film Thickness 355, 456

ISO 14654

 

Epoxy-coated steel for the reinforcement of concrete

 

Pinhole & Porosity 270

ISO 14656

 

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

 

Washability & Abrasion 5135, 5155

ISO 1518-1:2011

 

Paints and varnishes: Determination of scratch resistance - Constant-loading method

 

Hardness & Scratch 3000 Motorised
3000 Manual

ISO 15184

 

Paints and varnishes: Determination of film hardness by pencil test

 

Hardness & Scratch 501, 3080, 3086

ISO 1519-1

 

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure: Polyethylene (PE) - Specifications for pipes, fittings and the system

 

Elasticity & Deformation 1500

ISO 1519-2

 

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure: Polyethylene (PE) - Guidance for the assessment of conformity

 

Elasticity & Deformation 1506

ISO 1520

 

Paints and varnishes - Cupping test

 

Elasticity & Deformation 1620

 ISO 1522

 Paints and varnishes - Pendulum damping test

 

Hardness & Scratch

 

3045

ISO 1524

 

Paints, varnishes and printing inks - Determination of fineness of grind

 

Fineness of Grind 2020, 2041, 2050

ISO 16276-1

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing

 

Adhesion Testers 106

ISO 16276-1

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing

 

Adhesion Testers 506

ISO 16276-1

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing

 

Adhesion Testers 510

ISO 16276-1

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing

 

Adhesion Testers 108, 508

ISO 16276-2

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing

 

Adhesion Testers 107, 1542

ISO 16276-2

 

Corrosion protection of steel structures by protective paint systems: Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing

 

Dry Film Thickness 121/4 Adhesion

ISO 17025

 

General requirements for the competence of testing and calibration laboratories

 

Appearance Measurement 480

ISO 19840

 

Paints and varnishes: Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces

 

Dry Film Thickness 355, 456, 456IPC

ISO 2063

 

Thermal spraying: Metallic and other inorganic coatings - Zinc, aluminium and their alloys

 

Dry Film Thickness 355, 456

ISO 2063

 

Thermal spraying: Metallic and other inorganic coatings - Zinc, aluminium and their alloys

 

Hardness & Scratch 1537

ISO 2178

 

Non-magnetic coatings on magnetic substrates: Measurement of coating thickness (Magnetic method)

 

Dry Film Thickness 101

ISO 2178

 

Non-magnetic coatings on magnetic substrates: Measurement of coating thickness - Magnetic method

 

Dry Film Thickness 211

ISO 2360

 

Non-conductive coatings on non-magnetic electrically conductive basis materials: Measurement of coating thickness (Amplitude-sensitive eddy-current method)

 

Dry Film Thickness 415

ISO 2360

 

Non-conductive coatings on non-magnetic electrically conductive basis materials: Measurement of coating thickness (Amplitude-sensitive eddy-current method)

 

Dry Film Thickness 355, 456

ISO 2409

 

Paints and varnishes: Cross-cut test

 

Adhesion Testers 107, 1542

ISO 2409

 

Paints and varnishes: Cross-cut test

 

Dry Film Thickness 121/4

ISO 2431

 

Paints and varnishes: Determination of flow time by use of flow cups

 

Viscosity Cups 2353, 2437

ISO 24338

 

Laminate floor coverings: Determination of abrasion resistance

 

Rotational & Krebs Viscosity 5135, 5155

ISO 2555

 

Plastics: Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method

 

Washability & Abrasion 2300

ISO 2746

 

Vitreous and porcelain enamels - High voltage test

 

Pinhole & Porosity 266, 280

ISO 2746

 

Vitreous and porcelain enamels - High voltage test

 

Pinhole & Porosity 236, 280

ISO 2808

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 311, 456IPC

ISO 2808 Method 10

 

Paints and varnishes: Determination of
film thickness - Ultrasonic thickness gauge

 

Dry Film Thickness 500

ISO 2808-11B

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 311

ISO 2808-12

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 415

ISO 2808-12

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 355, 456

ISO 2808-12

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 355, 456

ISO 2808-12

 

Paints and varnishes - Determination of film thickness

 

Dry Film Thickness 355, 456

ISO 2808-12A

 

Paints and varnishes: Determination of film thickness - Magnetic-induction gauge

 

Dry Film Thickness 311

ISO 2808-1A

 

Paints and varnishes: Determination of film thickness - Comb gauge

 

Wet Film & Powder Thickness 112, 115, 3236, 3238

ISO 2808-1A

 

Paints and varnishes: Determination of film thickness - Comb gauge

 

Wet Film & Powder Thickness 154

ISO 2808-1B

 

Paints and varnishes: Determination of film thickness -  Wheel gauge

 

Wet Film & Powder Thickness 3230

ISO 2808-5B

 

Paints and varnishes: Determination of film thickness -  By difference in mass
Dry Film Thickness 141

ISO 2808-5B

 

Paints and varnishes: Determination of film thickness -  By difference in mass
Dry Film Thickness 121/4

ISO 2808-6A

 

Paints and varnishes: Determination of film thickness - Cross-sectioning
Dry Film Thickness 211

ISO 2808-6A

 

Paints and varnishes: Determination of film thickness - Cross-sectioning
Dry Film Thickness 355, 456

ISO 2808-6A

 

Paints and varnishes: Determination of film thickness - Cross-sectioning
Dry Film Thickness 415

ISO 2808-6B 

 

Paints and varnishes: Determination of film thickness - Wedge cut

 

Dry Film Thickness 121/4

ISO 2808-6B

 

Paints and varnishes: Determination of film thickness - Wedge cut
Dry Film Thickness 355, 456

ISO 2808-6B

 

Paints and varnishes: Determination of film thickness - Wedge cut
Dry Film Thickness 415

ISO 2808-6B

 

Paints and varnishes: Determination of film thickness - Wedge cut

 

Dry Film Thickness 141

ISO 2808-7A

 

Paints and varnishes: Determination of film thickness - Magnetic pull-off gauge

 

Dry Film Thickness 211

ISO 2808-7A

 

Paints and varnishes: Determination of film thickness - Magnetic pull-off gauge
Wet Film & Powder Thickness 3230

ISO 2808-7B

 

Paints and varnishes: Determination of film thickness - Magnetic-flux gauge
Wet Film & Powder Thickness 112, 115, 3236, 3238

ISO 2808-7B

 

Paints and varnishes: Determination of film thickness - Magnetic-flux gauge
Wet Film & Powder Thickness 154

ISO 2808-7C

 

Paints and varnishes: Determination of film thickness - Magnetic-induction gauge

 

Dry Film Thickness 355, 456

ISO 2808-7C

 

Paints and varnishes: Determination of film thickness - Magnetic-induction gauge

 

Dry Film Thickness 415

ISO 2808-7C

 

Paints and varnishes: Determination of film thickness - Magnetic-induction gauge

 

Dry Film Thickness 311

ISO 2808-7D

 

Paints and varnishes: Determination of film thickness - Eddy-current gauge

 

Dry Film Thickness 311

ISO 2808-7D

 

Paints and varnishes: Determination of film thickness - Eddy-current gauge

 

Dry Film Thickness 355, 456

ISO 2808-7D

 

Paints and varnishes: Determination of film thickness - Eddy-current gauge

 

Dry Film Thickness 415

ISO 2811-1

 

Paints and varnishes: Determination of density - Pyknometer method

 

Density 1800

ISO 2813

 

Paints and varnishes: Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees

 

Appearance Measurement 480, 408

ISO 2814

 

Paints and varnishes: Comparison of contrast ratio (hiding power) of paints of the same type and colour

 

Film Application Leneta

ISO 2815

 

Paints and varnishes: Buchholz indentation test

 

Hardness & Scratch 3095

ISO 2884-2

 

Paints and varnishes: Determination of viscosity using rotary viscometers - Disc or ball viscometer operated at a specified speed

 

Rotational & Krebs Viscosity 2300

ISO 29601

 

Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film

 

Pinhole & Porosity 266

ISO 29601

 

Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film

 

Pinhole & Porosity 236

ISO 29601

 

Paints and varnishes: Corrosion protection by protective paint systems - Assessment of porosity in a dry film

 

Pinhole & Porosity 280

ISO 3537

 

Road vehicles: Safety glazing materials - Mechanical tests

 

Washability & Abrasion 5135, 5155

ISO 3668

 

Paints and varnishes: Visual comparison of the colour of paints

 

Appearance Measurement 6300

ISO 4287

 

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters

 

Surface Preparation

7061, 7062

ISO 4287/1

 

Surface roughness: Terminology - Surface and its parameters

Surface Preparation

7061, 7062

ISO 4586-2

 

High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties

 

Hardness & Scratch 3092

ISO 4586-2

 

High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties

 

Hardness & Scratch 3025

ISO 4586-2

 

High-pressure decorative laminates: Sheets made from thermosetting resins - Determination of properties

 

Washability & Abrasion 5135, 5155

ISO 4624

 

High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties

 

Adhesion Testers 106

ISO 4624

 

High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties

 

Adhesion Testers 506

ISO 4624

 

High-pressure decorative laminates (HPL, HPDL): Sheets based on thermosetting resins (Usually called Laminates) - Determination of properties

 

Adhesion Testers 510

ISO 5470-1

 

Rubber- or plastics-coated fabrics: Determination of abrasion resistance - Taber abrader

 

Washability & Abrasion 5135, 5155

ISO 6272:1993

 

Paints and varnishes - Falling-weight test

 

Elasticity & Deformation 1615

ISO 6272-1

 

Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter

 

Elasticity & Deformation 1615

ISO 6272-2

 

Paints and varnishes: Rapid-deformation (impact resistance) tests - Falling-weight test, small-area indenter

 

Elasticity & Deformation 1615

ISO 6860

 

Paints and varnishes - Bend test (conical mandrel)

 

Elasticity & Deformation  1510

ISO 7253

 

Paints and varnishes - Determination of resistance to neutral salt spray (fog)
Hardness & Scratch 1537

ISO 7267-2

 

Rubber-covered rollers: Determination of apparent hardness (Shore-type durometer method)

 

Hardness & Scratch 3120

ISO 7668

 

Anodizing of aluminium and its alloys: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees

 

Appearance Measurement 480, 408

ISO 7724-2

 

Paints and varnishes: Colorimetry - Colour measurement

 

Appearance Measurement 6085

ISO 7724-3

 

Paints and varnishes: Colorimetry - Calculation of colour differences

 

Appearance Measurement 6085

ISO 7783-1

 

Paints and varnishes:Determination of water-vapour transmission properties (Cup method)

 

Drying Time & Permeability 5100

ISO 7783-2

 

Paints and varnishes: Coating materials and coating systems for exterior masonry and concrete - Determination and classification of water-vapour transmission rate (permeability)

 

Drying Time & Permeability 5100

ISO 7784-1

 

Paints and varnishes: Determination of resistance to abrasion - Method with abrasive-paper covered wheels and rotating test specimen

 

Washability & Abrasion 5135, 5155

ISO 7784-2

 

Paints and varnishes: Determination of resistance to abrasion - Rotating abrasive rubber wheel method

 

Washability & Abrasion 5135, 5155

ISO 8045

 

Paints and varnishes: Determination of resistance to abrasion - Rotating abrasive rubber wheel method

 

Concrete & Metal Detection 181, 182

ISO 8289-A

 

Vitreous and porcelain enamels: Low voltage test for detecting and locating defects

 

Pinhole & Porosity 270

ISO 8501-1

 

Preparation of steel substrates before application of paints and related products: Visual assessment of surface cleanliness - Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

 

Surface Preparation

128

ISO 8502-11

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Field method for the turbidimetric determination of water-soluble sulfate

 

Surface Preparation

134 CSN

ISO 8502-3

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

 

Surface Preparation

142

ISO 8502-4

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application

 

Climatic Conditions 319

ISO 8502-4

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application

 

Climatic Conditions 320

ISO 8502-4

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Guidance on the estimation of the probability of condensation prior to paint application
Climatic Conditions 309

ISO 8502-5

 

Preparation of steel substrates before application of paints and related products:Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

 

Surface Preparation

134S

ISO 8502-5

 

Preparation of steel substrates before application of paints and related products:Tests for the assessment of surface cleanliness - Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

 

Surface Preparation

134 CSN

ISO 8502-6

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Extraction of soluble contaminants for analysis (The Bresle method)

 

Surface Preparation

138

ISO 8502-6

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Extraction of soluble contaminants for analysis (The Bresle method)

 

Surface Preparation

135A, 135B, 135C

ISO 8502-9

 

Preparation of steel substrates before application of paints and related products: Tests for the assessment of surface cleanliness - Field method for the conductometric determination of water-soluble salts

 

Surface Preparation

138
ISO 8503-1  
Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

Surface Preparation

125
ISO 8503-2  
Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of abrasive blast-cleaned steel (Comparator procedure)

Surface Preparation

125

ISO 8503-5

 

Preparation of steel substrates before application of paints and related products: Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of the surface profile

 

Surface Preparation

122, 124

ISO 868

 

Plastics and ebonite: Determination of indentation hardness by means of a durometer (Shore hardness)

 

Hardness & Scratch 3120

ISO 9227

 

Corrosion tests in artificial atmospheres - Salt spray tests

 

Hardness & Scratch 1537

ISO 9352

 

Plastics: Determination of resistance to wear by abrasive wheels

 

Washability & Abrasion 5135, 5155

 

 

   

Return to the top

 

   

 

 

   

JIS

 

   

JIS A 1453

 

Methods of abrasion test for building materials and part of building construction (Abrasive-paper method)

 

Washability & Abrasion 5135, 5155

JIS B 0601

 

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters

 

Surface Preparation

7061, 7062

JIS G 3491

 

Asphalt Protective Coatings for Steel Waer Pipe 

 

Pinhole & Porosity 280

JIS G 3492

 

Coal-tar enamel protective coatings for steel water pipe

 

Pinhole & Porosity 280

JIS H 8503

 

Methods of Wear Resistance Test for Metallic Coatings

 

Washability & Abrasion 5135, 5155

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Wet Film & Powder Thickness 112, 115, 3236, 3238

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Wet Film & Powder Thickness 3230

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Wet Film & Powder Thickness 154

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 311

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 355, 456

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 211

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 415

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 101

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 121/4

JIS K 5600-1-7

 

Testing methods for paints: General rule - Determination of film thickness

 

Dry Film Thickness 141

JIS K 5600-2-4

 

Testing methods for paints: Characteristics and stability of paints -Density (Pyknometer method)

 

Density 1800

JIS K 5600-2-5

 

Testing methods for paints: Characteristics and stability of paints - Finess of grind 

 

Fineness of Grind 2020, 2041, 2050

JIS K 5600-4-3

 

Testing methods for paints: Visual characteristics of film - Visual comparison of the colour of paints

 

Appearance Measurement 6300

JIS K 5600-4-5

 

Testing methods for paints: Mechanical property of film - Scratch hardness (Pencil method)

 

Appearance Measurement 6085

JIS K 5600-4-6

 

Testing methods for paints: Visual characteristics of film - Colorimetry (Calculation of colour differences)

 

Appearance Measurement 6085

JIS K 5600-4-7

 

Testing Methods for Paints: Visual Characteristics of Film - Specular Gloss 

 

Appearance Measurement 480

JIS K 5600-5-1

 

Testing Methods for Pants: Mechanical Property of Film - Bend Test (Cylindrical Mandrel) 

 

Elasticity & Deformation 1500, 1506

JIS K 5600-5-2

 

Testing Methods for Paints: Mechanical Properties of Film - Cupping Test 

 

Elasticity & Deformation 1620

JIS K 5600-5-3:1999

 

Testing methods for paints: Mechanical property of film - Falling-weight test

 

Elasticity & Deformation 1615

JIS K 5600-5-4

 

Testing methods for paints: Mechanical property of film - Falling-weight test

 

Hardness & Scratch 501, 3080, 3086

JIS K 5600-5-5

 

Testing methods for paints: Mechanical property of film - Falling-weight test

 

Hardness & Scratch 3000 Motorised
3000 Manual

JIS K 5600-5-6

 

Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Cross-cut test) 

 

Adhesion Testers 107, 1542

JIS K 5600-5-7

 

Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Pull-off methods) 

 

Adhesion Testers 106

JIS K 5600-5-7

 

Testing Methods for Paints: Mechanical Property of Film - Adhesion Test (Pull-off methods) 

 

Adhesion Testers 510

JIS K 5600-5-8

 

Testing methods for paints: Mechanical property of film - Abrasion resistance (Rotating abrasive-paper-covered wheel method)

 

Washability & Abrasion 5155

JIS K 5600-5-9

 

Testing methods for paints: Mechanical property of film - Abrasion resistance (Rotating abrasive rubber wheel method)

 

Washability & Abrasion 5155

JIS K 5600-5-11

 

Testing methods for paints: Mechanical property of film - Washability

 

Washability & Abrasion 1720

JIS K 6404-22

 

Testing Methods For Rubber-or Plastics-coated Fabrics: Determination Of Abrasion Resistance

 

Washability & Abrasion 5155

JIS K 6766

 

Pinhole Test Method of Lined Films for Corrosion Prevention 

 

Pinhole & Porosity 270

JIS K 6766

 

Pinhole Test Method of Lined Films for Corrosion Prevention 

 

Pinhole & Porosity 266

JIS K 6766

 

Pinhole Test Method of Lined Films for Corrosion Prevention 

 

Pinhole & Porosity 236

JIS K 6902

 

Testing Method for Laminated Thermosetting High-Pressure Decorative Sheets

 

Washability & Abrasion 5155

JIS K 7205

 

Testing Method for Abrasion Resistence of Plastics by Abrasive 

 

Washability & Abrasion 5155

JIS L 0849

 

Test Methods for Colour Fastness to Rubbing 

 

Washability & Abrasion 5750

JIS Z 8741

 

Specular glossiness - Methods of measurement

 

Appearance Measurement 480, 408

 

 

   

Return to the top

 

   

 

 

   

MIL

 

   

MIL-C-3004

 

Coating, Fire-Resistant, Adhesive (for repairing surface of fibrous glass insulation board) 
Washability & Abrasion 1720

MIL-C-46057

 

Coating, Polyurethane
Washability & Abrasion 1720

MIL-E-11237

 

Enamel, Synthetic, Lustreless 
Washability & Abrasion 1720

MIL-STD-1334B

 

Military Standard, Process for Barrier Coating of Anti-Friction Bearing 
Washability & Abrasion 1720

MIL-P-15422C

 

Military Specification; Polish, Metal (Liquid)
Washability & Abrasion 1720

 

 

   
Return to the top      
       

NACE

 

   

NACE RP0188

 

Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
Pinhole & Porosity 270

NACE RP0188

 

Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
Pinhole & Porosity 266

NACE RP0188

 

Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
Pinhole & Porosity 236

NACE RP0190

 

External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems 
Pinhole & Porosity 266

NACE RP0274

 

High-Voltage Electrical Inspection of Pipeline Coatings

 

Pinhole & Porosity 266

NACE RP0274

 

High-Voltage Electrical Inspection of Pipeline Coatings

 

Pinhole & Porosity 236

NACE RP0274

 

High-Voltage Electrical Inspection of Pipeline Coatings

 

Pinhole & Porosity 280

NACE RP0287

 

Field Measurement of Surface Profile of AbrasiveBlast-Cleaned Steel Surfaces Using a Replica Tape

 

Surface Preparation

122, 124

NACE RP0490

 

Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)
Pinhole & Porosity 266

NACE RP0490

 

Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)
Pinhole & Porosity 236

NACE SP0188

 

Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

 

Pinhole & Porosity 270

NACE SP0188

 

Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

 

Pinhole & Porosity 266

NACE SP0188

 

Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

 

Pinhole & Porosity 236

NACE SP0188

 

Standard Practice Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

 

Pinhole & Porosity 280

NACE SP0490

 

Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)

 

Pinhole & Porosity 266

NACE SP0490

 

Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)

 

Pinhole & Porosity 236

NACE SP0490

 

Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)

 

Pinhole & Porosity 280

NACE TM0186

 

Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

 

Pinhole & Porosity 280

NACE TM0384

 

Holiday Detection of Internal Tubular Coatings of less than 250 micrometers (10 Mils) Dry-Film Thickness 

 

Pinhole & Porosity 270

NACE TM0384

 

Holiday Detection of Internal Tubular Coatings of less than 250 micrometers (10 Mils) Dry-Film Thickness 

 

Pinhole & Porosity 280
       
Return to the top      
       
NBN      
NBN T22-104  
Automatic Cupping Tester
Elasticity & Deformation 1620
NBN T22-110  
Stainless Steel Density Cup
Density 1800
       
Return to the top      
       
NEMA      
NEMA LD 3  
Laminate Testing
Washability & Abrasion 5135, 5155
       
Return to the top      
       
NF      
NF A49-211  
Steel Tube Plain end Seamless Hot Rolled Tubes with Special Delivery Conditions
Dry Film Thickness 355
NF A91-124  
Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods
Hardness & Scratch 1537
NF P18-417  
Non-Destructive Concrete Testing  in Structures/Digital Concrete Test Hammer
Concrete & Metal Detection 181, 182
NF P38-501  
Barcol Hardness Tester/
Thickness Measurement (with gel-coat)
Hardness & Scratch 3101
NF Q03-055  
Paper and Board Tests - Determination of Abrasion Resistance of Paper and Board (By the Taber Method) 
Washability & Abrasion 5135, 5155
NF T30-014  
Viscosity of Flow Cup (paints, lacquers, inks and other viscous products)
Viscosity Cups 2352, 2436
NF T30-016 Paints and varnishes - Pendulum damping test

 

Hardness & Scratch

 

3045
NF T30-017:1989  
Material Impact Testing 
Elasticity & Deformation 1615
NF T30-019  
Paints and varnishes - Cupping test
Elasticity & Deformation 1620
NF T30-020  
Paints and varnishes - Determination of density
Density 1800
NF T30-038  
Paints and varnishes - Cross-cut test
Adhesion Testers 107, 1542
NF T30-038  
Paints and varnishes - Cross-cut test
Dry Film Thickness 121/4 Adhesion
NF T30-040  
Paints and varnishes - Bend test (cylindrical mandrel)
Elasticity & Deformation 1500
NF T30-046  
Paints, varnishes and printing inks - Determination of fineness of grind
Fineness of Grind 2020, 2041, 2050
NF T30-052  
Paints and varnishes - Buchholz indentation test
Hardness & Scratch 3095
NF T30-062  
Paints and varnishes - Pull-off test for adhesion
Adhesion Testers 106
NF T30-062  
Paints and varnishes - Pull-off test for adhesion
Adhesion Testers 506
NF T30-062  
Paints and varnishes - Pull-off test for adhesion
Adhesion Testers 510
NF T30-123  
Paints: Determination of Dry Film Thickness - Microscope Methods 
Dry Film Thickness 141
NF T30-123  
Paints: Determination of Dry Film Thickness - Microscope Methods 
Dry Film Thickness 121/4
NF T30-124  
Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. 
Dry Film Thickness 211
NF T30-124  
Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. 
Dry Film Thickness 415
NF T30-124  
Paints and Varnishes: Measurement of Dry Film Thickness - Non-Destructive Method with a Magnetic Flux. 
Dry Film Thickness 355, 456
NF T30-125  
Paints: Determination of wet film thickness
Wet Film & Powder Thickness 112, 115, 3236, 3238
NF T30-125  
Paints: Determination of wet film thickness
Wet Film & Powder Thickness 154
NF T30-125  
Paints: Determination of wet film thickness
Wet Film & Powder Thickness 3233
NF T30-125  
Paints: Determination of wet film thickness
Wet Film & Powder Thickness 3230

NF T30-606

 

Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test

 

Adhesion Testers 108, 508

NF T30-606

 

Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test

 

Adhesion Testers 106

NF T30-606

 

Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test

 

Adhesion Testers 506

NF T30-606

 

Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test

 

Adhesion Testers 510

NF T36-006

 

Fillers for interior use: Measurement of adhesion-cohesion by a pull-off test

 

Appearance Measurement 6085

NF T51-123

 

Plastics: Verification of Shore hardness durometers.

 

Hardness & Scratch 3120

NF T51-174

 

Plastics and Ebonite - Determination of indentation hardness by means of a durometer shore hardness 
Hardness & Scratch 3120

NF X08-012-1

 

Colours - Colorimetry - Colorimetric characteristics of coloured samples - Definitions and basic assessment principles

 

Appearance Measurement 6085

NF X08-012-2

 

Colour - Colorimetry - Colorimetric Characteristics of coloured samples - practical considerations concerning instrumentation and reflection measurment 

 

Appearance Measurement 6085

 

 

   

Return to the top

 

   

 

 

   

PSA

 

   

PSA D45 1010

 

Polymer Material and Parts inside and outside passenger compartment - Colour fastness to rubbing 
Washability & Abrasion 1720, 1720 Tool 8

 

 

   
Return to the top      
       

SAE

 

   

SAE J 1530

 

Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials

 

Washability & Abrasion 5135, 5155

SAE J 1847

 

Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping

 

Washability & Abrasion 5135, 5155

SAE J 365

 

Method of Testing Resistance to Scuffing of Trim Materials

 

Washability & Abrasion 5135, 5155

SAE J 948

 

Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth

 

Washability & Abrasion 5135, 5155

SAE J 361

 

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

 

Appearance Measurement 6300

 

 

   

Return to the top

 

   

 

 

   

SANS

 

   

SANS 5772

 

Preparation of steel substrates before the application of paints and related products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile of blast-cleaned surfaces determined by a micrometer profile gauge

 

Surface Preparation

123, 224

 

 

   
Return to the top      
       

SIA

 

   

SIA 262

 

Non-Destructive Site Air - Permeability Test

 

Concrete & Metal Detection 331

 

 

   
Return to the top      
       

SIS

 

   
SIS 923509  
Falling Sand Method: Abrasion Resistence test on floor floor varnishes and floor lacquers
Washability & Abrasion 5135, 5155
       
Return to the top      
       
SS      
SS 184159  
Protective Coating Inspection Kit 
Dry Film Thickness 355, 456
SS 55900  
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness

Surface Preparation

128
SS 923509  
Floorings - Determination of abrasion resistance
Washability & Abrasion 5135, 5155
SS-EN 206  
Concrete - Specification, performance, production and conformity
Concrete & Metal Detection 331
       
Return to the top      
       
SSPC      
SSPC Guide 15  
Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates 

Surface Preparation

130, 130SSP
SSPC Guide 15  
Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates 

Surface Preparation

134S
SSPC Guide 15  
Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates 

Surface Preparation

138
SSPC Guide 15  
Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates 

Surface Preparation

134 CSN
SSPC Guide 15  
Field Methods for extraction and analysis of soluble salts on steel and other nonporous substrates 

Surface Preparation

138/2
SSPC PA17  
Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements

Surface Preparation

123, 224
SSPC PA17  
Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements

Surface Preparation

125, 127
SSPC PA17  
Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements

Surface Preparation

122
SSPC PA17  
Procedure for determining conformance to Steel Profile/Surface Roughness/Peak Count Requirements

Surface Preparation

7061, 7062
SSPC PA2  
Measurement of Dry Coating Thickness with magnetic Gages
Dry Film Thickness 101
SSPC PA2  
Measurement of Dry Coating Thickness with magnetic Gages
Dry Film Thickness 211
SSPC PA2  
Measurement of Dry Coating Thickness with magnetic Gages
Dry Film Thickness 355, 456, 456IPC
SSPC PA9  
Measurement of Dry Coating Thickness on Cementitious Substrates Using Ultrasonic Gauges
Dry Film Thickness 500
SSPC VIS 1  
Pictorial Surface Preparation Standards For Painting Steel Surfaces

Surface Preparation

128
SSPC VIS 2  
Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces

Surface Preparation

128
SSPC VIS 3  
Guide and Reference Photographs for Steel Surfaces Prepared By Power and Hand Tool Cleaning

Surface Preparation

128
SSPC VIS 4  
Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting

Surface Preparation

128
SSPC VIS 5  
Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning

Surface Preparation

128
       
Return to the top      
       
TAPPI      
TAPPI T 476  
Abrasion loss of paper and paperboard
Washability & Abrasion 5135, 5155
TAPPI T 515  
Visual grading and color matching of paper; Test Method
Appearance Measurement 6300
TAPPI T 653  
Speular Gloss of Paper and Paperboard at 20 Degrees 
Appearance Measurement 480
       
Return to the top      
       
UNE      
UNE 135203-1  
Road Marking Equipement - Materials. Laboratory Abrasion Tests - Abrasion Resistence. Taber Method. 
Washability & Abrasion 5135, 5155
UNE 48250  
Paints and Varnishes - Abrasion Resistence; Taber Method. 
Washability & Abrasion 5135, 5155
UNE 56842  
Kitchen furniture - Tests for surfacing materials.
Washability & Abrasion 5135, 5155
UNE 56843  
Kitchen furniture - Physical tests
Washability & Abrasion 5135, 5155
UNE 56868  
Bathroom furniture - Physical test methods.
Washability & Abrasion 5135, 5155
UNE 57095  
Paper and board - Determination of abrasion resistance (Taber method)
Washability & Abrasion 5135, 5155
       
Return to the top      
       
UNI      
UNI 10174  
Instruction For The Inspection Of Reinforced Concrete Structure Exposed Atmosphere By Half Potential Mapping
Concrete & Metal Detection 331
UNI 9189  
High Perfrmance Ultrasonic Tester
Concrete & Metal Detection 181, 182
       
Return to the top      
       
US NAVY      
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish
Climatic Conditions 319
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish
Climatic Conditions 320
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish
Dry Film Thickness 355, 456, 456IPC
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish

Surface Preparation

138, 130SSP
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish

Surface Preparation

128
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish

Surface Preparation

122, 124
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish

Surface Preparation

123, 224
US Navy NSI 009-32  
Cleaning and Painting Requirements; accomplish
Wet Film & Powder Thickness 112, 115, 3236, 3238

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Climatic Conditions 319

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Climatic Conditions 320

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Dry Film Thickness 355, 456

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Surface Preparation

142

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Surface Preparation

138

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Surface Preparation

128

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Surface Preparation

122, 124

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Surface Preparation

123, 224

US Navy PPI 63101-000

 

Cleaning, Surface Preparation and Painting Requirements for (area to be prepared)

 

Wet Film & Powder Thickness 112, 115, 3236, 3238
       
Return to the top